Props for my 35 Lightning
#22
What is the height of your drives off the bottom of you boat? I am trying to do some home work but can not get any measurements. ? Botttom of hull to center of prop shaft. Mine is 4". If I had a 35 with 502mpi's I would put pro chargers on and hang on. we have guys running them here and love them.
#23
Registered
Joined: Jun 2005
Posts: 1,232
Likes: 3
From: Chesapeake, Va.
Originally Posted by carney
What is the height of your drives off the bottom of you boat? I am trying to do some home work but can not get any measurements. ? Botttom of hull to center of prop shaft. Mine is 4". If I had a 35 with 502mpi's I would put pro chargers on and hang on. we have guys running them here and love them.
#24
Originally Posted by H2Xmark
I have a single step 35 fountain a 97 model, bought it from
www.dallasboats4sale.com, I have had it for 8 months it has been repowered with 500efi's and Ext. boxes all put on by Leon Derberry. it has 28Q4 hydro props turning in. the drives are marked 1.36 ratio and it will turn 5150 rpm's which comes out to 82.8 on gps at the Clear lake poker run with both tanks full , gear and my girlfriend on board, my X is 3" and it still comes on plane pretty good, have to baby it a tad, never tried any other props yet, hope to this winter, hope this helps a little
www.dallasboats4sale.com, I have had it for 8 months it has been repowered with 500efi's and Ext. boxes all put on by Leon Derberry. it has 28Q4 hydro props turning in. the drives are marked 1.36 ratio and it will turn 5150 rpm's which comes out to 82.8 on gps at the Clear lake poker run with both tanks full , gear and my girlfriend on board, my X is 3" and it still comes on plane pretty good, have to baby it a tad, never tried any other props yet, hope to this winter, hope this helps a little
#25
Originally Posted by john.sblendorio
Your numbers suggest that the drives are 1.5:1. You would be running in the high 90's with 1.36:1. I would not be surprised if Leon rebuilt or swapped the upper gears out of your drives and replaced them with a 1.5 set.
#27
Originally Posted by H2Xmark
I bet you are right about the ratio on the drives, the boat just dont feel like it is slipping , I need to turn the engine over 1 full revolution and see how far the prop turns
#28
maybe we better find out what props this guy is running - (or what he smokin) 87 GPS w/502 MPI's
http://adcache.boattraderonline.com/6/3/4/80903334.htm
http://adcache.boattraderonline.com/6/3/4/80903334.htm
#30
Registered

Joined: Dec 2001
Posts: 3,922
Likes: 393
From: Indianapolis, Lake Cumberland
Originally Posted by Ran-Dom 32
maybe we better find out what props this guy is running - (or what he smokin) 87 GPS w/502 MPI's
http://adcache.boattraderonline.com/6/3/4/80903334.htm
http://adcache.boattraderonline.com/6/3/4/80903334.htm


