|
Re: Fountain trim
Originally Posted by US1 Fountain
You can change over your single in-throttle switch to a dual switch setup, 1 for drives, 1 for tabs. I'm doing this right now.
What brand levers do you have now? Nordic95 |
Re: Fountain trim
Do the levers look like black or white ones?
|
Re: Fountain trim
You can add duals to both of those. The Zero Effort (black) sits in front of the knob and the others (white) just replace the single switch with a dual.
|
Re: Fountain trim
I added the single to the black ones, Kieksauffers, on my '94. However, it required some customizing since the levers didn't have the wire feed tube. I added that myself. Easiest too just buy the clamp ons that face the front.
The Gaffrig..... I ordered the dual switch from LIvorsi, to replace my single, (dual switch plate w/ switches, wires, diodes) for a shade over $100. Only using 1 of the $0.91 switches and the $4 diodes. Not a good business decision...pay over $100 for a part, and only use $5 worth of it. :rolleyes: |
| All times are GMT -5. The time now is 04:25 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.