Replacement Carpet
12-13-2006 | 02:32 PM
#2
Registered
Joined: Jun 2006
Posts: 361
Likes: 0
From: California
12-13-2006 | 09:24 PM
#5
Thread Starter
Platinum Member
Joined: Jun 2005
Posts: 3,376
Likes: 0
From: Tulsa, Oklahoma / GLOC
Re: Replacement Carpet
Originally Posted by runafever
What color? I have blue Fountain carpet for a 38 fever that I want to get rid of cheap. Could be made to fit yours i'm sure.
12-13-2006 | 09:33 PM
#6
10x
Joined: Dec 2003
Posts: 4,796
Likes: 2
From: La Grange Ill
Re: Replacement Carpet
Installed mine myself. Bought the carpet, took a large piece of plastic, cut it and trimmed it to fit the interior, snapped it down after I scribed it so it would'nt move as I was moving on it. Then send it to this place here in Joliet Illinois, and they cut out the logo and word from a different color carpet, and sewed it into the original piece after they cut it out first.
I think I paid $300 for all the carpet cause I bought enough to do it again in a few years if I still have the boat, and the art work and stiching cost $200.
Did the Cigarette too for my buddy.
I think I paid $300 for all the carpet cause I bought enough to do it again in a few years if I still have the boat, and the art work and stiching cost $200.
Did the Cigarette too for my buddy.
__________________
Fountain powerboats rule "The Preacher"
Chicago Powerboat Club Director
[email protected]
www.chicagopowerboat.com
Fountain powerboats rule "The Preacher"
Chicago Powerboat Club Director
[email protected]
www.chicagopowerboat.com
Last edited by 10x; 12-13-2006 at 09:39 PM.
12-13-2006 | 09:59 PM
#7
Forum Regulator
Joined: May 2001
Posts: 24,210
Likes: 1,603
From: Worldwide
Re: Replacement Carpet
www.rrtextiles.com
Send your old carpet to them, or a pattern, and they will make new to match. VERY good quality. Mine was so nice, and heavy duty, I did not have to install snaps on the new piece due to the nice non-skid backing.
Send your old carpet to them, or a pattern, and they will make new to match. VERY good quality. Mine was so nice, and heavy duty, I did not have to install snaps on the new piece due to the nice non-skid backing.
