![]() |
Best Prop for 35 Executioneer
I had been running Hydromotives prior to going to -2 Imco shorties. I am now breaking in the new lowers with some Bravos. I am seriously thinking of labbing some Bravos. for my final set up. Is there any other prop worth trying for top end? Herrings - worth the $? I am thinking that I should stay with a 4 blade for top end and the easiest on the drives? Thanks.
|
I ran 32 pitch labbed Maximus on my 05 Ex. It had 1.65 gears in the lowers. They were great getting on plane and ran 61-62 at 4000. The fuel economy was much better than with the 4 blades because of the better cruise speed.
|
I'm only running a stock Bravo One uppers. I'm afraid of the five blades and the load they create. My gears are 1.5:1. Is the Herring or a cnc prop worth the extra money, or is a labbed Bravo One going to be the best. I need to be able to get on plane with my -2 shorties, but am looking for top speed. Really don't do that much cruising.
|
bets hole shot from the maximus and rough water/ allaround handling. and if you lad em they ll still give you the top end. and i wouldnt sweat the load factor ass your not making big power.
merc 4 bld and hydro p5 are about the same top end, p5 having more in the middle. |
Originally Posted by monstaaa
(Post 2141587)
bets hole shot from the maximus and rough water/ allaround handling. and if you lad em they ll still give you the top end. and i wouldnt sweat the load factor ass your not making big power.
merc 4 bld and hydro p5 are about the same top end, p5 having more in the middle. Hydro P5 or P5X? |
p5, the p5 x's seem to work better on the singles.
i also have a set on a 38 that runs just under 110. i do like these wheels. the bite hartd, turn well, accelerate without losing top end. and are not so easy to ding up compared to some others. |
I recommend labbed Maximus. Have had great success with them. Don't forget to cut the difuser ring down at least .5 inch. Make sure prop has cup also.
- Vinnie |
Originally Posted by HPFountain
(Post 2141771)
I recommend labbed Maximus. Have had great success with them. Don't forget to cut the difuser ring down at least .5 inch. Make sure prop has cup also.
- Vinnie |
How much do you think I would be giving up on top with the Maximus versus the Bravo? I have been speaking with Bblades. I am running 700hp per side.
|
99' 38 fever, 750 h.p, 1:50, 2" shorty, 15 1/4x30 max=100
" same stuff "4 bld merc 14 1/4x32= 104 rpm diff of 200, samr water conditons and air temps. testing was done back to back to back along with hydro's 6 blds( they didnt work at all). what you sacrifice on top you will pick up in the midrange. before the lad expect 7-11 mph increase on cruise and 3 off up top. serious planing times . hammer down maybe 5 seconds vs. 20+. HYDRO 5 BLD'S loose out the hole next to the max but faster. |
| All times are GMT -5. The time now is 11:20 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.