496 w/Raylar Kit BCK-103
12-09-2007 | 01:35 AM
#1
Thread Starter
Registered
Joined: Jan 2007
Posts: 1,667
Likes: 0
496 w/Raylar Kit BCK-103
2003 27' Fever Stock 496 w/Stock Bravo I 28 Prop 4 Blade
Boat runs 67-70 depending on conditions and usually can hit limiter at 5150 RPM
Anyone know how much more prop I could expect to turn and whether or not I should have it worked or leave it alone?
Really don't want to keep buying props and trying to resell etc.
Boat runs 67-70 depending on conditions and usually can hit limiter at 5150 RPM
Anyone know how much more prop I could expect to turn and whether or not I should have it worked or leave it alone?
Really don't want to keep buying props and trying to resell etc.
12-09-2007 | 03:15 AM
#2
Registered
Joined: May 2005
Posts: 257
Likes: 0
From: LOTO 19 MM
So what you are asking is how much more prop can you turn after the BCK - 103 kit?
I think this has came up before and everyone said 2inch bump. So you could go to a 30 or change from 1.65 gears down to 1.50s and keep the same prop and have better docking manners.
When are You going to do the Raylar Kit? Keep us updated on how it goes and the details on the install
I think this has came up before and everyone said 2inch bump. So you could go to a 30 or change from 1.65 gears down to 1.50s and keep the same prop and have better docking manners.
When are You going to do the Raylar Kit? Keep us updated on how it goes and the details on the install
