|
When it runs....
1 Attachment(s)
Almost forgot what it looks like....:lolhit:
|
About the time it hits 102.5 both are at 5400. Occasionally I feel the limiter kick in.
Variances can be prop, slip %, tach, engine HP/torque, driveshaft. For the most part the sticks are fairly even at all RPMs When my boat was bone stock it did 93 on my test drive with the owner. He'd never seen that before. Only 92. Had Bravo 32's I broke 4 B32's in a couple summers so I went to the Max 32's and it took 4 years to crack one. Midrange cruise efficiency went up 4-7MPH per same RPM. Top end dropped to 91MPH at a little less RPM though. I was very happy with the Max's. The best prop for planing so far has been the B32's I'll let the -1's go separately. |
i bought some -2's today. Are those numbers from stock maximas or labbed? Thanks for the info !!
|
Originally Posted by TRL505
(Post 3592028)
Almost forgot what it looks like....:lolhit:
|
You guys should try some Hydro P-5x's. I got better mid-range and top end vs the bravos or max's.
|
2 Attachment(s)
|
Originally Posted by mcprodesign
(Post 3592275)
i bought some -2's today. Are those numbers from stock maximas or labbed? Thanks for the info !!
I tried some P5X's and the mid wasn't as good as the Max's. Couldn't do a top end run because I was all over the limiters. I was in need of the 35's at that time(engine mods). They were more fun than the spare 30 Max's I had at the time though. I think I went something like this 32 Bravos, stock engines, 93MPH busted 32 Bravo busted 32 Bravo busted 32 Bravo busted 32 Bravo 30 Max's, stock engines, 88 MPH all over limiters??? 32 Max's, stock engines, 91 MPH 32 Max's, innercooler, 93 MPH on limiter blown head gasket busted cam a couple hours after fixing head gasket 32 Max's, new engines, 93 MPH all over the limiter busted 32 Max 30 Max's, new engine, 88 MPH all over limiters 35 Hering's, new engines, -1 lowers, 102.5 MPH barely on limiters, empty or full = 102.5MPH 35 Herings, new engines, busted drive, 0 MPH |
CAt that thin looks bitc-hin'! I like the drive set up too. :drink:
Rob are you going back to 5 blades now?? I am running 32 px5's and I like them now. But we will see how they work 3 inches higher. I might re pitch them . |
1 Attachment(s)
come on summer :drink:
|
Originally Posted by 1 MAIDEN AMERICA
(Post 3592359)
Merc labbed Max's
I tried some P5X's and the mid wasn't as good as the Max's. Couldn't do a top end run because I was all over the limiters. I was in need of the 35's at that time(engine mods). They were more fun than the spare 30 Max's I had at the time though. I think I went something like this 32 Bravos, stock engines, 93MPH busted 32 Bravo busted 32 Bravo busted 32 Bravo busted 32 Bravo 30 Max's, stock engines, 88 MPH all over limiters??? 32 Max's, stock engines, 91 MPH 32 Max's, innercooler, 93 MPH on limiter blown head gasket busted cam a couple hours after fixing head gasket 32 Max's, new engines, 93 MPH all over the limiter busted 32 Max 30 Max's, new engine, 88 MPH all over limiters 35 Hering's, new engines, -1 lowers, 102.5 MPH barely on limiters, empty or full = 102.5MPH 35 Herings, new engines, busted drive, 0 MPH |
| All times are GMT -5. The time now is 06:55 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.