|
damn!
|
The motor made 780 hp @ 6000 rpm. The box helped but I can say how much. I spent a lot of time setting up the drive height. My box is slotted with a screw jack. I noticed a difference with a quarter in change
|
That is so awesume.. Looks like you took the little lip off the windscreen too.. Did that give you any speed?? Looks like a 92.. Man ..that's how they should run..Thanks for the vid.
-Chad:cool-smiley-026: |
27 fever
i wish my 27 was that fast.what size fuel tank do you have and how long can you cruise?
|
Originally Posted by JimV
(Post 2741051)
The motor made 780 hp @ 6000 rpm. The box helped but I can say how much. I spent a lot of time setting up the drive height. My box is slotted with a screw jack. I noticed a difference with a quarter in change
|
Originally Posted by JimV
(Post 2740832)
Hey thanks guy's. The engine is a 565 ci with a dart block and heads. compression ratio 10.5: 1, hydraulic roller cam with a holley tunnel ram efi. I run a stellings box with a 1.5 ratio bravo (non XR gears) turning a 30" labbed b1 four blade at 6100 rpm.
It wants to chine a little at 70 but once you drive thru it the boat settles nicely. It's a rush to drive :) |
I know the boat well, and Jim can make it fly.
She's won her class at the LOTO shoot out many times. Great video. |
Originally Posted by SDFever
(Post 2741283)
Impressive to say the very least. How long do you feel comfortable holding 6K?? In terms of seconds/minutes?
If you have a forged and balanced crank and rods and pistons, a good oil coller and a big oil pan it should do that all day with no problems. just keep an eye on the oil temp |
Originally Posted by bcfountain
(Post 2741223)
i wish my 27 was that fast.what size fuel tank do you have and how long can you cruise?
I think the tank holds 70 gallons. Cruise is not that great with the go fast prop. 3500 rpm is about 45mph |
Seems like you have a great package there!! Do you have a picture of the Stelling box? I feel my 29 would gain more bow lift with added set back on the drives, resulting in less need for high trim angle to air out. What about your steering?? How is that mounted now?
Erik |
| All times are GMT -5. The time now is 01:08 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.