Hi there, I'm making the name to attach to the stern of my 27 Fever, but I don't have her handy to check the space available.
Is there anyone who could kindly check and confirm me the two measures as per the red lines below?
I don't think there's a lot of difference with other models as the 29, 35 and 38, so one of them would be also be ok I guess.
Thanks in advance!

On our 07 38 its 27.5 inches. Edge of the vent to the edge of latch bracket. 3 5/8 inches tall.

Many thanks, by heart I'd say those measures make sense also for the 27.
Of course, any 27 owner who could check/confirm is more than welcome!

Checked my 35 this afternoon for you. The flat surface, not counting the rolled edges, is 3 1/2" high and the space between the latch and vent is 27 1/4".

Thanks also to you RE, the height was actually my main concern, 'cause the drawing I made is 3" high.
Now I'm confident it will fit, I don't really think the Fever 27' is narrower.