Removing Dash Plate??
05-12-2010 | 12:01 AM
#1
Thread Starter
Registered
Joined: Mar 2006
Posts: 891
Likes: 0
From: Montgomery, TX
Removing Dash Plate??
Is it true that you can remove the entire gauge/dash cluster by simply unplugging plugs? Is there an actual wiring harness that allow wires to be disconnected under the dash? Oh and this is in a 96 35' Lightning.
05-12-2010 | 06:29 AM
#2
Registered
Joined: Jan 2010
Posts: 150
Likes: 0
From: Winterville NC
dash
Its pretty easy alittle then harness'. 4 indicator cables, two throttle, two shift cables, Two engine harness' 1 trim harness,water psi hoses, speedo hose, and depth gauge. from the factory everything has plugs or very easily attached. hope that helped.
05-12-2010 | 10:59 AM
#3
Ginger or Mary Ann?
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
All the wiring on my '99 just unplugged. Had several trailer type of plug connectors. Other than the shifter and indicator cables.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
05-12-2010 | 11:44 AM
#5
Registered
Joined: Sep 2003
Posts: 15,491
Likes: 5
From: LAKE CONROE, TX
