Replacing cuddy @ the Fountain factory
#51
Registered
Joined: Jun 2001
Posts: 630
Likes: 4
From: Graham,NC
OK I have had enough. Reggie, cheating is cheating whether it is YOU or someone else. Like changing ECM,s between the buildings after winning the Fountain race in the early 2000's. Get the splinter out of your own eye before trying to get it out of someone elses. And don't forget losing the national speed record for F-1s because of some issues that did not go over with APBA. ENOUGH SAID
#53
Registered
Joined: Jun 2001
Posts: 630
Likes: 4
From: Graham,NC
Back to the original question. Take your boat to the factory. They put the original interior in the boat and the same people can do it again. I had the complete insides done on my 95 29 foot and they did an excellent job. Brian took charge of the upfit and the cost was reasonable.
#54
Thread Starter
Platinum Member

Joined: Oct 2007
Posts: 2,256
Likes: 21
From: Osage Beach, Missouri - 28mm
Back to the original question. Take your boat to the factory. They put the original interior in the boat and the same people can do it again. I had the complete insides done on my 95 29 foot and they did an excellent job. Brian took charge of the upfit and the cost was reasonable.
#55
Back to the original question. Take your boat to the factory. They put the original interior in the boat and the same people can do it again. I had the complete insides done on my 95 29 foot and they did an excellent job. Brian took charge of the upfit and the cost was reasonable.
Just a point of information,Did the change the cabin door also?You would have to change the whole dash to do that I would think.Or did the just adapt the new interior to the swing out doors?
#58
Registered
Joined: Feb 2006
Posts: 924
Likes: 25
From: Chattanooga, TN
I'm very happy with Brian at Fountain and wouldn't trust anyone else to do the work on my boat. Mine is there now getting upgrades because of the great experience I received from Brian last year. He made my boat fly! Not only that he pointed out and upgraded things I didn't even notice.
I have piece of mind leaving it with Brian, I know when I get it back, everything will be perfect!
At least give him and call and explore your options.
My humble .02c
I have piece of mind leaving it with Brian, I know when I get it back, everything will be perfect!
At least give him and call and explore your options.
My humble .02c
#59
OK I have had enough. Reggie, cheating is cheating whether it is YOU or someone else. Like changing ECM,s between the buildings after winning the Fountain race in the early 2000's. Get the splinter out of your own eye before trying to get it out of someone elses. And don't forget losing the national speed record for F-1s because of some issues that did not go over with APBA. ENOUGH SAID
Originally Posted by Reggie Fountain I I have rigged, setup and been racing for over 10 yrs, brian can't even race one year without being caught cheating! And they didn't even find have the illegal parts that he had! That motor in watch your back might as well be a 600 merc!
Well, no surprise there. What is pathetic is that your Dad is evedintly OK with all of this going on. Says a lot for his Character
__________________
Abby-someone
Abby-someone
Last edited by Gordo; 02-14-2011 at 01:16 PM.
#60
Thread Starter
Platinum Member

Joined: Oct 2007
Posts: 2,256
Likes: 21
From: Osage Beach, Missouri - 28mm
I'm not 100% sure what direction I'm going now. I didn't relaize they haven't changed the cuddy on the 47 to match the upgrades in 2008 when I started this thread. I'd also been thinking about moving back down to a 42 because I like to trailer to other lakes and the 47 is a hoss to drag around; however, the wife loves the AC/gen/bathroom on the 47. I don't want to waste Brian's time, when I figure it out I will give them a call and get some prices.
Mark - can a guy get a look at the larger version of your avatar?
Mark - can a guy get a look at the larger version of your avatar?



