The new wheels.....
#38
Registered
What was your goal for the 7 blades?
When you got the boat did you have the 6 blade 31's?
Overall how do you like the boat, I have wondered about these, seem like a nice size and shouldn't be bad working on it with the Staggered motors.
When you got the boat did you have the 6 blade 31's?
Overall how do you like the boat, I have wondered about these, seem like a nice size and shouldn't be bad working on it with the Staggered motors.
Last edited by Wildman_grafix; 06-16-2011 at 08:41 AM.
#39
Registered
iTrader: (1)
Speaking frankly, if you can only pull 4900 RPM out of a set of 525s then those props are just wrong for that boat and engine package. I'm sure Mercury racing would tell you the same thing. You should be running 5100-ish with a full load and 5250 with a light load. On a brutal hot humid July day you may only be able to pull 4800 out of them with that kind of load. The boat is over-propped with that set of 7 blades IMO.
#40
Registered
Scott R. @ Merc Racing told me to shoot for the 52 -53 mark with an average load, claimed the 525's pull real hard right around that mark. With the current 5 blades I never see less than 5 regardless of load or weather. Actually the 4 blade Bravo's act pretty much the same. Good water and air I will turn over 5400 and it acts like it is still pulling well.