Notices

10 Meter

Thread Tools
 
Old 04-21-2011, 03:13 PM
  #1  
Registered
Thread Starter
 
Join Date: Apr 2011
Location: South Jersey
Posts: 97
Likes: 0
Received 0 Likes on 0 Posts
Default 10 Meter

I just picked up an 86 10 meter in great shape without power I feel was dirt cheap and was planning on dropping in a pair of 500-525hp carbed motors with TRS drives . What approx top speed should I expect from his hull ?
Duck Diggler is offline  
Old 04-21-2011, 08:37 PM
  #2  
Registered
 
Join Date: Dec 2008
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Default speed

expect around 78 mph. I have a 88 10 Meter with 525hp and labbed props and run 80. I have the boat with Brian Forehand going to 800 hp with new drives. I have transmissions and complete trs drives with gimbles, everything you need for sale if interested. Eerything is perfect inspected by Brian and with him at this time.
FOUNTAIN10METER is offline  
Old 04-21-2011, 08:41 PM
  #3  
Registered
 
Join Date: May 2003
Location: Michigan
Posts: 175
Likes: 0
Received 1 Like on 1 Post
Default

Fountain 10 Meter
What pitch props are you running, and how many rpms?

Thanks.
GS42fun is offline  
Old 04-21-2011, 08:47 PM
  #4  
Registered
 
Join Date: Dec 2008
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Default

I have 30 Bravos labbed by BB Blades. 5000 rpm. nose cones on drives
FOUNTAIN10METER is offline  
Old 04-21-2011, 09:42 PM
  #5  
Registered
 
Join Date: May 2003
Location: Michigan
Posts: 175
Likes: 0
Received 1 Like on 1 Post
Default

Fountian 10 Meter thanks for the reply. On my 10 Meter I am running 25 pitch 4 blade hydromotives at 5600. GPS at 82 mph with cones also. I bought a pair of 26 hydro's and I am getting a little faster cruise speed but a slower top end. I was thinking about trying bravo's. That is why I was asking.
Have you tried other props?

Thanks again for the reply.
GS42fun is offline  
Old 04-21-2011, 09:51 PM
  #6  
Registered
Thread Starter
 
Join Date: Apr 2011
Location: South Jersey
Posts: 97
Likes: 0
Received 0 Likes on 0 Posts
Default

Hey, Fountain10meter, thanks for the reply thats what I was shooting for 75-80mph. You running 502's or 454's? Whats your cruising speed/rpm, approx fuel burn? You selling the 525hp motors?
Duck Diggler is offline  
Old 04-22-2011, 12:24 AM
  #7  
Registered
 
Billy Frenz's Avatar
 
Join Date: Jan 2003
Location: Greenwich, Connecticut
Posts: 315
Likes: 0
Received 0 Likes on 0 Posts
Default '87 10 Meter

...I cruise at 60 mph at 4,000 RPM, (on the primaries), with the same driveline...25" 4 Blade Hydromotives.
BF
Billy Frenz is offline  
Old 04-22-2011, 08:13 AM
  #8  
Registered User
Gold Member
 
bcfountain's Avatar
 
Join Date: Apr 2007
Location: prince george,va
Posts: 1,474
Likes: 0
Received 0 Likes on 0 Posts
Default

i would be interested in seeing what speeds guys are running in there 10meters w/trs vs bravo drives.454,s vs 502,s.i picked up my 10meter back in november for a good price,could not pass it up.good luck w/your 10meter duck-digger
bcfountain is offline  
Old 04-22-2011, 03:37 PM
  #9  
Registered
Thread Starter
 
Join Date: Apr 2011
Location: South Jersey
Posts: 97
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks, bcfountain. Thats where I'm at right now, trying to decide between the 454's or the 502's. All the accessories are set up for a gen IV setup. What are you running in yours?
Duck Diggler is offline  
Old 04-24-2011, 12:55 PM
  #10  
Registered
iTrader: (3)
 
Join Date: Jul 2004
Location: chicago
Posts: 11,332
Received 71 Likes on 39 Posts
Default

You 10 meter guys, turning your props in or out???
MILD THUNDER is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.