Ok guys the solenoids did not work they still just click so I had the wife hit the switch while I jumped across the solenoid and the pump runs but it is slow when I go straight from the bat it runs good and strong don't make sense need more help please lol

Wow, That makes we wonder if the solenoids are really pulling in, All they are is a relay and when it pulls in it is just like jumping across the terminals.

Ya it acts like I just bought two new bad solenoids

Start checking your connections at each point.
If you have a volt meter put one end on ground then probe each place, see what the voltage does when the wife hits the trim switch.

You will find it. On my 32 I had a bad connection on the wires under the rear seat where the breakers are.

Well I fixed it guys I won't tell you how stupid and easy it was to fix lol Thanks for all your help.

Please tell us!?:eek:

Breaker tripped?

Yes it was just the breaker I felt real stupid lol:drink:

Sent you a PM before I read this. I figured it was just that. Glad its fixed.