![]() |
Originally Posted by excalibur82
(Post 3631522)
My boat is an 84 it had #3 speed masters. I converted it to bravo's talked to alot of people even reggie on his cell and this is how I set it up. I have stock 420's with stainless marine exhaust and ran 78 on the gps... I didnt even play with props that was a stock pair of 26 bravo ones spinning them in at 5200.Gets on plane no problem with no tabs...I bet I could get 80 no problem....I know a guy with 420's and trs on his 85 10 meter and runs 70/72..The proof is in the pudding...
EX-----how far bleow the running surface is your propshaft?? |
It's a 1/2 inch below.
|
Here is a video of me running. I am the last guy to go by.http://www.youtube.com/watch?v=So5iW...bdAUAAAAAAADAA
|
I had 5 guy's and full of fuel and was running 74. You can see it carrys the bow well and throws a cool tail... lol
|
Originally Posted by 47 lightning
(Post 3631482)
I just raised X dimension to 24 inches or prop shaft height to 2 1/2 inches above the running surface. Any info would be appreciated..
Does that put the engines on top of the hatch? Are you gonna need a jet ski to pull you up like the big wave surfers? Do you have ext boxes......stacked? No cabin? |
Wheres the propshaft at on newer nxt/6 boats?
|
Originally Posted by 1 MAIDEN AMERICA
(Post 3631628)
That's up there. I'm worried about getting on plane now that I'm "even" with the running surface. I'll find out Sunday.
Does that put the engines on top of the hatch? Are you gonna need a jet ski to pull you up like the big wave surfers? Do you have ext boxes......stacked? No cabin? |
Originally Posted by excalibur82
(Post 3631562)
I had 5 guy's and full of fuel and was running 74. You can see it carrys the bow well and throws a cool tail... lol
|
| All times are GMT -5. The time now is 08:02 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.