Old school executioner upgrade/restore
01-02-2013, 07:58 PM
#12
Registered
Thread Starter
Sweet rides guys! I just got pumped and its only January......
Man there is so many different ways to go. Like usual it comes down to the pocket book...damn. Lol
Man there is so many different ways to go. Like usual it comes down to the pocket book...damn. Lol
01-04-2013, 01:10 PM
#14
Registered
Join Date: Nov 2008
Location: NJ
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Heres my tub...
1990 38 Fever
Engines: 468CI B&M 420 Blowers off a 800sc, dart alum race series heads, 6lbs of boost=800HP
Drives: SSM IV No boxes 1.5'' Below bottom
Huber 1200 Trannys
Stellings Green Headers with Dry Tails
So Far conservative tune 88MPH Turning 17x28 4 Blades at 5600RPM. (engines only make 760hp at 5600). Still need to play with jetting and props. A little video of me horsin around
http://www.youtube.com/watch?v=BYxgYc_Sddc
1990 38 Fever
Engines: 468CI B&M 420 Blowers off a 800sc, dart alum race series heads, 6lbs of boost=800HP
Drives: SSM IV No boxes 1.5'' Below bottom
Huber 1200 Trannys
Stellings Green Headers with Dry Tails
So Far conservative tune 88MPH Turning 17x28 4 Blades at 5600RPM. (engines only make 760hp at 5600). Still need to play with jetting and props. A little video of me horsin around
http://www.youtube.com/watch?v=BYxgYc_Sddc
01-04-2013, 04:05 PM
#16
Registered
If you need any paint work done, Overlimits on here owns a custom shop off I94 in Harrison twp. He does very nice work and can go as wild as you want. Good luck with your project. Hope to see you on St Clair this summer.
01-04-2013, 06:31 PM
#17
Registered
Thread Starter
First thing on the project list will be power, and maybe drives. The boat is in great shape, so probably won't be painting much anytime soon, but I will diffinatly keep that in mind when I'm ready. Thanks for the info!
Hope to see ya on the lake, look for a 12 meter fountain, has a 12 on the sides. Don't think there are to many older ones out there, but could be mistaken.
01-05-2013, 07:19 AM
#18
Registered
iTrader: (1)
a 91 i put 548 tall decks in this spring. runs mid 90's 650 hp a side. tall decks are tight. the "gil" nameplates were touching on the exhaust not letting me line up the mount holes. and we had to use wedges in the exhaust to line up out back. nice clean old dog tho
01-05-2013, 08:54 AM
#19
Registered
Join Date: Feb 2011
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
253, You got yourself one great Fountain. Meticulously maintained and pampered its entire life with fresh power. The same gentlemen built my "MONSTERS" in my BLUE 32! Real sharp and knows his stuff!! Danny is one of the few that keeps his rig in such immaculet condition in and out, the shine "OLE BLUE" sets off keeps him in ahh every time it comes out
01-05-2013, 04:25 PM
#20
Gold Member
Gold Member
Yes he is meticulous, I am keeping this Fountain in as nice or better cond. as he has,, the pics i posted on this page were taken just a couple days ago in my shop, can we see pics of yours, ,,and, I like all the boats shown on here, all very nice older equipment.
Thanks
Thanks
