![]() |
if still available..
i need 3 alum with washers. thanks!
|
Originally Posted by breakitout
(Post 3995653)
Hey, sort of unrelated.. how was the factory's response for parts? I would like to order a couple things but wasnt sure if anyone was around there or if they were still doing parts. Who did you contact to order them?
sorry about the side tracking,,, |
Originally Posted by boatnt
(Post 3995741)
bought a lot of parts from Fountain,,,sides of faring,,head rest skins and foam,,rear sun pad skin and foam,,rear head rest skin,,they made me cup holder because my 32 did not have any in the front,all the vinyl matched perfect to original vinyl ,,prices were in line with everyone else around me maybe a little cheaper,,started with Gail but she is no longer there and the new ladys name I believe is Joanna,,service was great no issues..
sorry about the side tracking,,, |
Originally Posted by joew.
(Post 3995265)
I am redoing my entire dash with a lot of stainless so I liked the idea... That said, I have not received them and I paid on 8/27/13. I have also not received any correspondence. I'd now say your $1 was well spent:(
|
Hello i have a Fountain 47 triple.Can you send to Sweden?If not i have a contact in Florida you can send them to.I have to count how many i need and pay you.3drives +2tabs if i am not misstaken.Means 5 and one for the floor equals 6.How much?
Can you quote alu and stainless? |
Originally Posted by boatnt
(Post 3995252)
ok guys,, dont want to step on any bodys toes here,,,,I was thinking about ordering some for my boat as well,,my question is what is wrong with the factory pointers??my factory ones had discolored a little so I called the factory a couple of weeks ago and ordered 4 new ones,,had them in 3 days and were $1.00 each including new screws,,
are these that much better? |
Originally Posted by MissBehavin777
(Post 3997260)
To answer your question with what's wrong with the factory pointers... they are plastic. I didn't like the look of cheap plastic parts so I made billet ones. Its a shame with all the money you spent on your boat and dash with Mitcher T paint and still have plastic pointers. I guess you can't beat $1.00 if you like plastic but if you want to look cool it cost a little more.
I just asked a question,,,, if you are getting upset because some guys have questioned where their new tabs are and why they have not received them please dont take it out on me,,talk to them,,I simply asked a question.. and you are correct I have spent alot of money on my boat and I just dont think the plastic pointers take away from all the work that I have done,,but I dont know if adding your pointers will really change the look either,, I did buy some extra pointers ($4.00 more dollars spent)and my buddy at the body shop is painting them,,I think I might like that better...will see.. Good luck,,and by the way plastic is not that bad,, I love women with plastic.. |
Originally Posted by MissBehavin777
(Post 3997260)
I guess you can't beat $1.00 if you like plastic but if you want to look cool it cost a little more.
|
Originally Posted by MissBehavin777
(Post 3996772)
I sent you a pm
"Sorry you haven't received them yet. This was my first time with orders and shipping. I will send you a new order with tracking number. I will pm you the tracking number once I get the shipment out. Sorry for any inconvenience." The next step will be to ship me the order and send the tracking number to confirm. Once I have my indicators, all will be forgiven. At this point, I still do not have either. I am not trying to be a jerk, but I ship things every day and I have not experienced the same troubles. I understand this is not your business, but I paid you money, please complete your portion of the transaction. |
I have received the P.M's as well but almost a month later I have no pointers. But you win some you loose some , the boat is still running with the plastic ones :whistle:
|
Originally Posted by joew.
(Post 3997318)
That is correct...
"Sorry you haven't received them yet. This was my first time with orders and shipping. I will send you a new order with tracking number. I will pm you the tracking number once I get the shipment out. Sorry for any inconvenience." The next step will be to ship me the order and send the tracking number to confirm. Once I have my indicators, all will be forgiven. At this point, I still do not have either. I am not trying to be a jerk, but I ship things every day and I have not experienced the same troubles. I understand this is not your business, but I paid you money, please complete your portion of the transaction. |
Originally Posted by Finney
(Post 3997386)
I have received the P.M's as well but almost a month later I have no pointers. But you win some you loose some , the boat is still running with the plastic ones :whistle:
|
Originally Posted by boatnt
(Post 3997299)
dude really??
I just asked a question,,,, if you are getting upset because some guys have questioned where their new tabs are and why they have not received them please dont take it out on me,,talk to them,,I simply asked a question.. and you are correct I have spent alot of money on my boat and I just dont think the plastic pointers take away from all the work that I have done,,but I dont know if adding your pointers will really change the look either,, I did buy some extra pointers ($4.00 more dollars spent)and my buddy at the body shop is painting them,,I think I might like that better...will see.. Good luck,,and by the way plastic is not that bad,, I love women with plastic.. |
Originally Posted by MissBehavin777
(Post 3997434)
I'm not upset at all. You asked what was wrong with plastic I told you I don't like them. I love the work you did to your boat and no the plastic doesn't take away at all. I just like shinny things. I see your in IL if you boat the chain of puddles we should grab a beer and I'll show you in person the difference they make to the dash.
would love to see your Fountain |
Originally Posted by boatnt
(Post 3997507)
Yes I boat at the puddle as well,,,maybe we could have a beer at captains or are you doing the river shiver?
would love to see your Fountain |
Missbehavin: Did you receive my paypall payment made to your e-mail address on 8-20-13? Not in any hurry to receive, but I'm looking forward to getting rid of the plastic pointers. I ordered 4 stainless pointers as I have replaced the dash with red carbon fiber with stainless bezels and the pointers are the last detail.
Thanks, |
Originally Posted by MissBehavin777
(Post 3997427)
You are correct I have not held up my end. I wanted to take care of this last week and had to go on a work emergency. Again not your problem its mine. I will be shipping today and will promptly send you tracking number.
|
Originally Posted by joew.
(Post 3998024)
Thank you. I look forward to the tracking number and shipment.
|
Originally Posted by MissBehavin777
(Post 3998248)
Your inbox is full I emailed you tracking number.
|
Originally Posted by 38fountainecman
(Post 3997880)
Missbehavin: Did you receive my paypall payment made to your e-mail address on 8-20-13? Not in any hurry to receive, but I'm looking forward to getting rid of the plastic pointers. I ordered 4 stainless pointers as I have replaced the dash with red carbon fiber with stainless bezels and the pointers are the last detail.
Thanks, |
Originally Posted by 38fountainecman
(Post 3997880)
Missbehavin: Did you receive my paypall payment made to your e-mail address on 8-20-13? Not in any hurry to receive, but I'm looking forward to getting rid of the plastic pointers. I ordered 4 stainless pointers as I have replaced the dash with red carbon fiber with stainless bezels and the pointers are the last detail.
Thanks, Thanks |
Missbehaven: Can you e-mail me at [email protected]? Tried to respond to pm and your mail box is full.
|
Originally Posted by 38fountainecman
(Post 3998746)
Missbehaven: Can you e-mail me at [email protected]? Tried to respond to pm and your mail box is full.
|
Just sent payment. Looking forward to getting some that don't break. Thanks!
|
Received, thank you.
|
count me in would like ss
|
Does anyone who bought the billet aluminum pointers have an extra one by any chance??
|
Is MissBehavin777 still making these and everyone that ordered get them? I'm doing blue carbon fiber and think this would be a nice touch.
|
Originally Posted by eddie
(Post 4064870)
Is MissBehavin777 still making these and everyone that ordered get them? I'm doing blue carbon fiber and think this would be a nice touch.
|
I got burned for $125.00, ordered and paid for the stainless steel, never sent, traded posts and e-mails, never received. A little dissapointed, don't know why some folks got theirs and I didn't, but that's life. Seemed like a nice guy, but must of gotten overwhelmed by it all.
|
Originally Posted by 38fountainecman
(Post 4065281)
I got burned for $125.00, ordered and paid for the stainless steel, never sent, traded posts and e-mails, never received. A little dissapointed, don't know why some folks got theirs and I didn't, but that's life. Seemed like a nice guy, but must of gotten overwhelmed by it all.
|
Wow I got mine a while ago he seemed like a good guy and made sure I got them. I have to agree with HyFive578, I hope nothing happen to him.
|
I got mine quick also. Even though I don't have the boat yet. Figured I'd get these for when I did.
|
no joke I was hoping to buy some dang it
|
That's too bad. Was he making these on the side at work or with his own machinery? I could see a machine shop frowning upon an employee using their equipment to make and sell parts for personal gains.
|
Anyone want to sell four they have and don't need now?
|
Originally Posted by eddie
(Post 4065454)
Anyone want to sell four they have and don't need now?
|
Hey guys haven't been on for awhile had some personal family matters that I was taking care of and all fell apart last couple months. Hyfive578 I have your spare part going to ship to you today. 38fountainecman I cant find the parts I had set aside for you so I can refund you your money today or I can make new ones in about two weeks. Eddie I will pm you to see what you need.
|
Originally Posted by US1 Fountain
(Post 4065433)
That's too bad. Was he making these on the side at work or with his own machinery? I could see a machine shop frowning upon an employee using their equipment to make and sell parts for personal gains.
|
Missbehavin: I would love to get the pointers and I'll surely wait the 2 weeks or so. It wasn't the money as much as I was dissapointed I wouldn't be able to get the pointers, my dash needs them terribly. I'm glad to hear you have worked though the family matters. Hope all is well.
|
| All times are GMT -5. The time now is 01:21 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.