Trim tab wiring

Reply Subscribe

Thread Tools

01-10-2014 | 05:44 PM

#21

Slow Poke

Registered

Joined: Mar 2010

Posts: 139

Likes: 0

From: Galveston,TX

Quote:

Originally Posted by Cole2534

It started that the tabs would go up or down individually and only down for BOTH. Then that little 12V+ circuit between the BOTH and individual switches broke, so nothing would go up.

From what I have gathered the "Both Up" Switch has gone kaput and the jumper for the hot has broken off, He said he could run them up and down with the individual switches until the power jumper broke which would tell us the pumps are good the solenoids are good as well as any wiring. It is a switch /jumper problem.

01-10-2014 | 06:26 PM

#22

buck35

Registered

Joined: Oct 2013

Posts: 1,953

Likes: 2

From: rock Island wa

tabs

I triec to take some pics under dash you were not kidding about standing on your head. May be jump off battery to see if pumps ok [ATTACH=CONFIG]516110[/ATTACH]

Attached Thumbnails

01-12-2014 | 11:03 AM

#23

Cole2534

Thread Starter

Registered

Joined: Jun 2012

Posts: 1,455

Likes: 1

From: OK CIty, OK

Quote:

Originally Posted by Slow Poke

That's exactly it. Going to try working on it some more today.

buck, that pic helps a lot. Thank you.

01-12-2014 | 11:05 AM

#24

Cole2534

Thread Starter

Registered

Joined: Jun 2012

Posts: 1,455

Likes: 1

From: OK CIty, OK

Quote:

Originally Posted by HyFive578

It's a little tough to tell how it's wired from your pictures, but given that you didn't change wiring, it seems like its the switch that has failed. Did you try disconnecting the hot and the "up" wires from the both switch and touch them together to see if the solenoid moves? If you get a response, then you know its the switch itself..

They'll go down, but not up. So I wonder if the failed switch could have taken a solenoid out with it?

I'm pretty savvy with simple circuits. So once I get some more time I'll try some things and report back.

01-14-2014 | 10:48 AM

#25

US1 Fountain

Ginger or Mary Ann?

Joined: Oct 2000

Posts: 11,030

Likes: 9

From: L

It'd had to ruin both solenoids

__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.

01-26-2014 | 03:55 PM

#26

Cole2534

Thread Starter

Registered

Joined: Jun 2012

Posts: 1,455

Likes: 1

From: OK CIty, OK

I figured out the wiring, I think.

Orange - 12v
White - starboard tab valve
Green - port tab valve
Yellow - motor reverse, up
Red - motor forward, down

This is how my boat is worse from the factory, it doesn't follow the OEM schematic. The pump is a Bennett V351.

Found it to be broken connection in the boat's wiring. Kind of bitter sweet, it'll be a free fix just a ***** to find.

Last edited by Cole2534; 01-26-2014 at 04:46 PM.