Go Back  Offshoreonly.com > Owners Forum > Fountain
NON step 35 Top Speeds >

NON step 35 Top Speeds

Notices

NON step 35 Top Speeds

Thread Tools
 
Old 03-17-2017, 08:48 AM
  #61  
253
Gold Member
Gold Member
 
Join Date: Jan 2002
Location: Southern, IL.
Posts: 700
Received 26 Likes on 20 Posts
Default

540 Merlin3 blocks, Dart Pro1 CNC'd alum. heads, Dart port matched intakes, Eddie Marine Thunder exh.,, MSD ign. w/the black bushing,, 10 qt. oil pans w/ scraper windage trays, H beam rods, JE pistons, Holley 9022 ,800 cfm carbs. dialed in w/ several jet changes, .600/.610 Howards roller cams degreed in, 35 degree total advance.,Champion Racing spark plugs changed at 30 hours,, 8mm plug wires, big oil coolers w/thermostats, 140 degree water thermostat, no circulating water pump just a crossover.
Just the usual maintence stuff to keep her running in top cond.
Bravo1's ,1.50 use Amsoil 75/110 Severe Gear oil., 28 Hydro Q4 props
253 is offline  
Old 03-17-2017, 09:09 AM
  #62  
Registered
 
Join Date: Feb 2017
Posts: 75
Likes: 0
Received 0 Likes on 0 Posts
Default

Nice!

Last edited by 93fountainsig35; 03-17-2017 at 01:07 PM.
93fountainsig35 is offline  
Old 03-18-2017, 08:19 PM
  #63  
Registered
 
Join Date: Aug 2015
Location: Ontario Canada
Posts: 154
Likes: 0
Received 0 Likes on 0 Posts
Default

so Hydromotive seems to have an edge for prop of choice...which Hydro specifically?

power is 509's, Merlin cast heads, Edelbrock intakes, Holley 850's...estimated HP is slightly above 500 each. pushing through XR's, 35 Fountain, non staggered flat bottom
Pete35Fountain is offline  
Old 03-19-2017, 09:00 AM
  #64  
253
Gold Member
Gold Member
 
Join Date: Jan 2002
Location: Southern, IL.
Posts: 700
Received 26 Likes on 20 Posts
Default

Call Hydromotive tell them what you have so they can figure which is best, also, they have an exchange program if you want to try a couple different props.
253 is offline  
Old 03-20-2017, 07:58 AM
  #65  
Registered
iTrader: (2)
 
Join Date: Feb 2008
Location: Connecticut
Posts: 6,644
Received 108 Likes on 65 Posts
Default

Nice power 253 !

My engines are similar. 496CI ,Dart Pro 1 alum heads, Solid rollers, 10.5:1 comp, 1050 Dominators on Dart intakes, CMI headers.They made 625HP... Im hoping for 85MPH...Just bought a set 30P Bravo1 props.
kreed is offline  
Old 03-20-2017, 09:23 AM
  #66  
253
Gold Member
Gold Member
 
Join Date: Jan 2002
Location: Southern, IL.
Posts: 700
Received 26 Likes on 20 Posts
Default

Nice setup, 30P Bravo1 is equal to 28P Hydromotive, but you need to trim the Bravo's more, and the Hydro's are a sternlifter to help get the heavy rear end lifted a bit for less drag, let me know how the Bravo's work out.,, I will take a guess and say 80-82 on gps.
Mike
253 is offline  
Old 03-21-2017, 06:53 AM
  #67  
Registered
iTrader: (3)
 
Join Date: Jul 2004
Location: chicago
Posts: 11,332
Received 71 Likes on 39 Posts
Default

While not a 35 , but a straight bottom 38 with #4's. I got 96.6 out of it this day. had 150 gallons of fuel on board. 17x28p props. 1.49 ratio. 6200rpm. Twin 800's. https://www.youtube.com/watch?v=DtWGMAdeKbU&t=2s
MILD THUNDER is offline  
Old 03-21-2017, 07:41 AM
  #68  
Registered
VIP Member
Thread Starter
 
Join Date: Mar 2007
Location: New Jersey
Posts: 936
Likes: 0
Received 4 Likes on 3 Posts
Default

Dang That is moving!!!!! looking good!!!! I just bought a pair of B&M 250's so I'm hoping for 90 this summer. I was running 75-77 last summer on my flat bottom 35 so lets see what happens.
excalibur82 is offline  
Old 03-21-2017, 07:56 AM
  #69  
253
Gold Member
Gold Member
 
Join Date: Jan 2002
Location: Southern, IL.
Posts: 700
Received 26 Likes on 20 Posts
Default

Nice, I would like to have a 38 someday.
253 is offline  
Old 03-21-2017, 08:12 AM
  #70  
Registered
VIP Member
Thread Starter
 
Join Date: Mar 2007
Location: New Jersey
Posts: 936
Likes: 0
Received 4 Likes on 3 Posts
Default

Originally Posted by 253
Nice, I would like to have a 38 someday.
Yea me too ! must be nice to be rich !!! lol
excalibur82 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.