42 Poker Run rerig
#252
Platinum Member
Platinum Member
Thread Starter
Finally got the last of the fittings in to run the sea pump on the dyno. Made 3 easy pulls to 5500. Will readjust valves tomorrow, make a couple adjustments then go for a full pull. Was a little worried with the big heads and exhaust that I might have some trouble down at lower rpm. I moved to a 1.35 year ratio used to run 1.5. But at 3500 rpm making over 90 more ft lbs.
#253
Platinum Member
Platinum Member
Thread Starter
This should work.
#257
Platinum Member
Platinum Member
Thread Starter
When you want to run the big wix filter but it is 1/2 inch too high and hits your tail pipe. No problem have billet Mike make you one 3/4 inch shorter!
#259
Platinum Member
Platinum Member
Thread Starter
Should be the end of this week.