Go Back  Offshoreonly.com > Owners Forum > Fountain
35 Lighting Prop Question >

35 Lighting Prop Question

Notices

35 Lighting Prop Question

Thread Tools
 
Old 07-12-2017 | 03:10 PM
  #1  
Thread Starter
Registered
 
Joined: Oct 2015
Posts: 243
Likes: 3
From: Charlotte, NC
Default 35 Lighting Prop Question

I have a 1993 Lighting with the original 25P Mirage 3 Blades Reggie installed at the factory. Boat still has original carbed 502 Mags and Bravo 1s
Looking for higher cruising speeds and not worried so much about max speed.

Whats been tried on this hull and with what results.


Thanks board
Papasmurf is offline  
Reply
Old 07-17-2017 | 09:30 PM
  #2  
Registered
 
Joined: Dec 2010
Posts: 523
Likes: 0
From: Port Deposit Md
Default

I'm not saying this is the answer for you but. My 29 with 454s when new was tested with 26s and ran it that way 74 WOT. My 35 has 30s and out of the hole is absolutely fantastic great mid range. Haven't gone wot because the motors are still in break in. But the test sheet says it came with 26s.
fordf350 is offline  
Reply
Old 07-17-2017 | 11:56 PM
  #3  
Registered
 
Joined: Aug 2015
Posts: 154
Likes: 1
From: Ontario Canada
Default

35 lightening flat bottom side by side. fresh 502's. Mirage plus 25's spinning in with prop vents open
2900 RPM = GPS 40
3500 RPM = GPS 52

Hope this is of some help
Pete35Fountain is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.