Getting ready for MitcherT :)
 

Started pulling off some hardware and stuff for the new Graphics.
Lot more twisting and contorting than I thought to get the rails off.



This is with the valances removed to get at the deck rail bolts...also replaced all of the crapped out light fixtures.
$21 bucks each online

Look Ma...no rails!:D

No vents, rails, pads, and snaps...stinky moldy under that rub rail!
Stunk up the whole warehouse...

Threw out those old Sony paper speakers for some up dated infinity 5.5in 2 ways.

Hey Mark,
I need to get a membership to view the pictures. Someday I'll get around to it.

I had to replace three out of the four florescent fixtures. I went with the guest fixtures. It seemed like they were put together better than the originals.

I ended up replacing the cheap Sony’s with four 6x9 Babbs. Audiofn turned me on to them. They are extremely efficient and can take a beating. I still need to install a sub. I just hate to loss any room under the back seat. Look forward to seeing the new look.

Dan

I'll pop over those 4 pics from above...
I'm going to put a 10" on the passanger side by the door and the other under the middle seat in the cabin, I will take pics.
Thanks...can't wait :p

Back4- Very cool, keep the pics coming, you must be getting excited, I know Id be dancing around telling everybody that would listen!.........Doug:D :cool:

Trailered her over there Sunday...Thank god we got her there before this snow hit.
Can't wait to get her back home.;)

Back 4 More

What type of design and colors are you going for???

Will:cool:

My avatar is a snippet from the graphic rendering.