Getting ready for MitcherT :)
#1
Registered
Thread Starter
Join Date: Feb 2002
Location: Lake Michigan
Posts: 6,627
Likes: 0
Received 0 Likes
on
0 Posts
Getting ready for MitcherT :)
Started pulling off some hardware and stuff for the new Graphics.
Lot more twisting and contorting than I thought to get the rails off.
This is with the valances removed to get at the deck rail bolts...also replaced all of the crapped out light fixtures.
$21 bucks each online
Lot more twisting and contorting than I thought to get the rails off.
This is with the valances removed to get at the deck rail bolts...also replaced all of the crapped out light fixtures.
$21 bucks each online
Last edited by Back4More; 02-17-2003 at 10:58 PM.
#5
Registered
Join Date: Jul 2001
Location: Tinley Park, IL
Posts: 5,242
Likes: 0
Received 0 Likes
on
0 Posts
Hey Mark,
I need to get a membership to view the pictures. Someday I'll get around to it.
I had to replace three out of the four florescent fixtures. I went with the guest fixtures. It seemed like they were put together better than the originals.
I ended up replacing the cheap Sony’s with four 6x9 Babbs. Audiofn turned me on to them. They are extremely efficient and can take a beating. I still need to install a sub. I just hate to loss any room under the back seat. Look forward to seeing the new look.
Dan
I need to get a membership to view the pictures. Someday I'll get around to it.
I had to replace three out of the four florescent fixtures. I went with the guest fixtures. It seemed like they were put together better than the originals.
I ended up replacing the cheap Sony’s with four 6x9 Babbs. Audiofn turned me on to them. They are extremely efficient and can take a beating. I still need to install a sub. I just hate to loss any room under the back seat. Look forward to seeing the new look.
Dan
#6
Registered
Thread Starter
Join Date: Feb 2002
Location: Lake Michigan
Posts: 6,627
Likes: 0
Received 0 Likes
on
0 Posts
I'll pop over those 4 pics from above...
I'm going to put a 10" on the passanger side by the door and the other under the middle seat in the cabin, I will take pics.
Thanks...can't wait
I'm going to put a 10" on the passanger side by the door and the other under the middle seat in the cabin, I will take pics.
Thanks...can't wait
Last edited by Back4More; 04-10-2003 at 07:38 PM.