Getting ready for MitcherT :)
 

Started pulling off some hardware and stuff for the new Graphics.
Lot more twisting and contorting than I thought to get the rails off.



This is with the valances removed to get at the deck rail bolts...also replaced all of the crapped out light fixtures.
$21 bucks each online

Look Ma...no rails!:D

No vents, rails, pads, and snaps...stinky moldy under that rub rail!
Stunk up the whole warehouse...

Threw out those old Sony paper speakers for some up dated infinity 5.5in 2 ways.

Hey Mark,
I need to get a membership to view the pictures. Someday I'll get around to it.

I had to replace three out of the four florescent fixtures. I went with the guest fixtures. It seemed like they were put together better than the originals.

I ended up replacing the cheap Sony’s with four 6x9 Babbs. Audiofn turned me on to them. They are extremely efficient and can take a beating. I still need to install a sub. I just hate to loss any room under the back seat. Look forward to seeing the new look.

Dan

I'll pop over those 4 pics from above...
I'm going to put a 10" on the passanger side by the door and the other under the middle seat in the cabin, I will take pics.
Thanks...can't wait :p

Back4- Very cool, keep the pics coming, you must be getting excited, I know Id be dancing around telling everybody that would listen!.........Doug:D :cool:

Trailered her over there Sunday...Thank god we got her there before this snow hit.
Can't wait to get her back home.;)

Back 4 More

What type of design and colors are you going for???

Will:cool:

My avatar is a snippet from the graphic rendering.

Can't wait to see the finished product. Your avatar is a hint of something really sweet.

C'mon on man, your killing us, I like the colors, (I'm partial to the purple) can't wait to see the finished product.:D

Ambusher, you thinking about doin the Fountain?
Nope...Sorry its under raps, top secret. LOL!
Custom motors...;)
Custom drives...;)
Custom stereo...;)
Custom graphics...;)
Donkey alum. trailer...:eek:
When its done i will post a before and after.:p

light fixtures
 

Where can I buy some of those light fixtures for my fountain? It's time to replace them. Thanks Poolshrk.:D

This is where i ordered them from.
http://www.solar-electric.com/tl-141.html

Sanding her down...

:eek:

Keep the pictures coming as they happen! It's great to see you took the time to remove the railings and rub rail. May have been alot of work, but well worth the extra effort.
Paint Good, tape bad. ;)

fades...oh baby!

closeup...

other side....

BACK 4- I think Mitcher T stole that paint scheme from my BMX team!! My son will like to see that, will it be at Smoke? Custom paint hasn't hit the National BMX circuit yet, so my faded mini's always get lots of attention. Midnigiht

PS: What happens when a boater goes to build bikes!

Ah, One more!

Hey...thats a nice bike!:cool:

Back 4- let us know how the rubrail install goes, something I want to do in the near future and Ive never talked to anyone whose actually done it.......did the rail come right from Fountain???..............thanks doug:cool: :cool:

Bought the rub rail parts through River View Marine.
I will post pics on install.
Almost done...should have it Sunday.

:cool:

;)

:)

Ok I can see its hard to tell what the boats going to look like.
So here is the rendering.

Way Cool Mark!
Keep em coming!
I'm ckecking this thread daily.

Looks GREAT! Big difference from the old isn't it! It makes the new boat look new and modern again.

Looks great he does outstanding work.

Thanks guys! Im so excited i won't be able to sleep from now till Sunday.
Its been cleared and is ready for wet sand and buff.
Will be going out there Sunday morning to bring her home.

Deck closeup...MitcherT is the man! :cool:

:p

Custom Fountain!

Vents are orange and have been removed so you see the yellow left over on the masking.
Once the new rub rail, interior and the new name vinyl is on it...should break it up nicely.

Last one.......;)

I think I know just how you felt!:p
Best $ I ever spent on her.