Bluprinting My Hull and...........

Reply Subscribe

Thread Tools

12-02-2003 | 08:07 PM

#31

StrikinLightnin

Thread Starter

Registered

Joined: Feb 2001

Posts: 538

Likes: 0

From: Portage,IN

Attached Thumbnails

Bluprinting My Hull and...........-img_0335.jpg

12-02-2003 | 08:15 PM

#32

StrikinLightnin

Thread Starter

Registered

Joined: Feb 2001

Posts: 538

Likes: 0

From: Portage,IN

Large spot was sanded down as far as possible.

Area was then filled in with glaze.

Attached Thumbnails

Bluprinting My Hull and...........-img_0334.jpg

Last edited by StrikinLightnin; 12-03-2003 at 12:36 AM.

12-02-2003 | 08:17 PM

#33

StrikinLightnin

Thread Starter

Registered

Joined: Feb 2001

Posts: 538

Likes: 0

From: Portage,IN

Low water pickup on port side sanded
and smoothed out.

Attached Thumbnails

Bluprinting My Hull and...........-img_0341.jpg

12-02-2003 | 08:20 PM

#34

StrikinLightnin

Thread Starter

Registered

Joined: Feb 2001

Posts: 538

Likes: 0

From: Portage,IN

Stern.......

Attached Thumbnails

Bluprinting My Hull and...........-img_0340.jpg

12-02-2003 | 08:21 PM

#35

StrikinLightnin

Thread Starter

Registered

Joined: Feb 2001

Posts: 538

Likes: 0

From: Portage,IN

Attached Thumbnails

Bluprinting My Hull and...........-img_0343.jpg

Last edited by StrikinLightnin; 12-02-2003 at 08:55 PM.

12-02-2003 | 08:28 PM

#36

StrikinLightnin

Thread Starter

Registered

Joined: Feb 2001

Posts: 538

Likes: 0

From: Portage,IN

Paul is putting on the finishing touch to tape
off the boat for tomarrow's gel coating.
Unfortunately I will not be able to get
over to Capt'n Nabbers tomarrow....

Attached Thumbnails

Bluprinting My Hull and...........-img_0345.jpg

12-02-2003 | 08:38 PM

#37

StrikinLightnin

Thread Starter

Registered

Joined: Feb 2001

Posts: 538

Likes: 0

From: Portage,IN

....But while I'm gone I know my boat will be secure,
meet "TANK"

Not to worry,
He's a great guy and he loves treats

Until next week*******Adios My Friends

Attached Thumbnails

Bluprinting My Hull and...........-img_0347.jpg

Last edited by StrikinLightnin; 12-02-2003 at 08:58 PM.

12-03-2003 | 01:06 AM

#38

candyman35

Registered

Joined: Jul 2001

Posts: 5,242

Likes: 0

From: Tinley Park, IL

Cool project! Your 42 is going to be better than new by summer.

Dan

12-03-2003 | 08:22 AM

#39

StrikinLightnin

Thread Starter

Registered

Joined: Feb 2001

Posts: 538

Likes: 0

From: Portage,IN

Thanks Dan,

I've decided that since the boat
is already over there and the side windshield
panels are off,
I'm going to pull the interior and have
all the cracks repaired around the windshield
and race hatch area.

When Fountain installed the windshield,
the screw holes weren't chamfered.
This allowed the 'glass to crack.