|
Originally posted by StrikinLightnin Scott, You know your always welcome.....:) BUT bring your stocking cap,,,,, I want to run early to see what the props are doing. Going to have Precision Propeller in Indy blueprint them. |
US1,
What I've been told is that any type of wave or indifference on the surface will act as a suction cup. The hull on this boat was really pretty straight.:) |
UHMMM,UMMMM,
I know that you really like boating Scott but.....:p |
Oh, come on, you know youare dying to test it !!!!
|
Updates??????????????????????????????????????????? ???????????
|
I know I know:rolleyes:
I stopped over a few times and they were having problems getting a match for the gel. They finally got the right stuff and sprayed the bottom. I believe they used Mini Craft for the Gel. I had concerns about thickness of the gel and they sprayed and sanded three times with seven coats applied each time instead of two and seven. I'll try to get some pics next week. |
NON STEP
DOES ANYONE HAVE ANY IDEA HOW MUCH IT WILL HELP ASFAR AS MPH.I HAVE A 38 FEVER WITH 420'S AND IT RUN 68 IN 3-4S AND 64-65 IN FLAT WATER AND PEOPLE TELL ME THATS KINDA SLOW?
|
j w, I also have an early 38 Fever and I am seeing the same speeds. I have a factory Bravo boat and newer 502mag efi's 415hp. I also have a noticable hook that I am looking to remove.
|
FLAT BOTTOM
I CHECKED THE BOTTOM OF THE BOAT AND IT IS STRAIGHT.IS THERE ANY MPH TO BE GAINED IN BLUEPRINTING THE BOTTOM OF MINE TO MAKE SURE IT IS TOTALY FLAT WITH SHARP EDGES?
|
Re: FLAT BOTTOM
Originally posted by j winkelman I CHECKED THE BOTTOM OF THE BOAT AND IT IS STRAIGHT.IS THERE ANY MPH TO BE GAINED IN BLUEPRINTING THE BOTTOM OF MINE TO MAKE SURE IT IS TOTALY FLAT WITH SHARP EDGES? Are you sure that the entire running surface is straight? |
| All times are GMT -5. The time now is 07:11 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.