Stereo Remote Question
#32
Registered

Joined: May 2011
Posts: 227
Likes: 0
From: Dallas, TX
I put my Clarion remote on my transom very easy. Just make sure you are clear in the back side before you drill. I had to drill a 2 1/8" hole for the remote. I could not get to the back of the remote to use the remote mounting bracket, so mounted it to the transom with 5200 for now. I am having a nice mounting plate fabricated out of stainless, which is 1/4" larger than the remote. I will mount the remote to it and then mount the plate to the transom.
#33
Registered
Joined: Feb 2007
Posts: 1,124
Likes: 13
From: Hamilton, Ohio
I drilled mine out by the cleat, by the swim deck... Right below where the last stud of the rail enters into the deck. Had a friend fish for the wires from the hole & connected them before mounting it. Then carefully just reached back there & put the bracket on, it took some time. All of this was only possible because I'm 6'5 w/ longer than normal arms!!
Thread
Thread Starter
Forum
Replies
Last Post
zimm17
General Q & A
6
07-13-2006 01:16 AM





