Cabana Bar - Monday May 7th, 4 PM
#1
VIP Member
VIP Member
Thread Starter
Join Date: Sep 2005
Location: Marco Island, FL; Waterloo, ON, CAN
Posts: 5,736
Received 121 Likes
on
21 Posts
Cabana Bar - Monday May 7th, 4 PM
Just wonder who might be available for a little get together at the Cabana on Monday late afternoon? It will be my last chance to see some of you before I close up the condo for the summer and fly home on Tues. morning....... but I will be back in late September.
Bob
Bob
#7
VIP Member
VIP Member
Thread Starter
Join Date: Sep 2005
Location: Marco Island, FL; Waterloo, ON, CAN
Posts: 5,736
Received 121 Likes
on
21 Posts
No problem. I will be coming by car myself. Loading the boat onto the trailer before I come up to Naples. It was nice to see you on the docks at Salty Sam's.
Saw Captnate and Springbrook at Keywaydin on my way home from FM Beach this afternoon and they will be there as well.
Bob
Saw Captnate and Springbrook at Keywaydin on my way home from FM Beach this afternoon and they will be there as well.
Bob
#8
VIP Member
VIP Member
Thread Starter
Join Date: Sep 2005
Location: Marco Island, FL; Waterloo, ON, CAN
Posts: 5,736
Received 121 Likes
on
21 Posts
Third motor was not ready on time so I ran the Poker Run on 2. Ran in the low 70's and never had to push it over 4,200 RPM all day long. We were the 13th boat [ not that a poker run is a race of coarse ] out of 37 to arrive at the first card stop and even picked up a couple of positions by the time we got to lunch at South Seas Plantation. Thought that was pretty respectable.
Bob
#9
Registered
Join Date: Feb 2007
Location: Ohio / Florida
Posts: 1,136
Likes: 0
Received 0 Likes
on
0 Posts
Bob - I do not know much at all about 3 screw set-ups. Please enlighten me about what you can and can not do.
Did you have the immediate resources available to pull one engine and move another?! Sounds like you have your own pit crew! Also sounds like you can run 2 engines fairly easily?
You also mentioned pulling a drive and blocking with a plate?
I have wondered if you can cruise slowly through the canals on one without crazy drag from the other 2 drives? And if you could just remove the center eng. & drive altogether?
Please enlighten me.
Thanks in advance, Mark
Did you have the immediate resources available to pull one engine and move another?! Sounds like you have your own pit crew! Also sounds like you can run 2 engines fairly easily?
You also mentioned pulling a drive and blocking with a plate?
I have wondered if you can cruise slowly through the canals on one without crazy drag from the other 2 drives? And if you could just remove the center eng. & drive altogether?
Please enlighten me.
Thanks in advance, Mark