Re: motor bad again. Help!
 

i had the motor built 2 times,
original motor and crank excreta.
so I kneed a water pressure not temp Gage, along with a oil temp Gage huh.
I did put my hand on the oil filter and I tell you it was probably over 180 mabey 240 or so 2 second touch hot.!!
what would cause high oil temp and hou do you keep low oil temp?

Bring Out Another Thousand .......again and again and again and again

Re: motor bad again. Help!
 

the motor had like 60 or so hours on it before I did the new heads cam exhaust intake.

Re: motor bad again. Help!
 

where are you getting them rebuilt at???

Re: motor bad again. Help!
 

tolerances are too tight.that builds oil temp...........especially the mains...........

Re: motor bad again. Help!
 

Where should I go or should I get a new crate motor or should I get one from 1800runsnew.com?
I wish I didn't ever mess with it.

Re: motor bad again. Help!
 

Get hold of JC perf here on the board, he can get you a 502 at a great price...

Re: motor bad again. Help!
 

I was warned by serveral different engine builders that the runsnew motors were truck blocks and not Merc long blocks. Try perfprotech.com, they claim to be Merc long blocks. They are GenVI motors, so I think you will need some other parts.

Re: motor bad again. Help!
 

Have a marine engine builder build a motor. Lots of automotive guys think they know how to build "any" motor but marine engines are different. Remember, when your running in a boat it's like driving up a steep hill all day long at 4800rpm or whatever you cruise at. It's a tough environment for an engine.

And no, you need a water pressure AND temp guage alone with an oil pressure and temp guage, when they read out of the norm shut the thing off and figure out what went wrong.

Re: motor bad again. Help!
 

Ok thanks for the help.
Can anyone tell me where to go in mi.
would I be better off to buy a crate longblock for 4600 gm merc.
sell the old parts on e-bay .

Re: motor bad again. Help!
 

Who Sell Them For $4600.00