Cylinder Head Choice For Blower Motors?
#11
Re: Cylinder Head Choice For Blower Motors?
Originally Posted by WETTE VETTE
I also like 18 degree dart for this CI motor. Big Chief, Big Duke and Profilers are also good choices. 705 is a BIG motor!!!
Tom I would think they have dish blower piston already for those cubes . the 705-[706]-714 is a common combination now.
I know Jeff[JC} has built a few with the big chiefs
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#12
Re: Cylinder Head Choice For Blower Motors?
Originally Posted by P Offshore
Everyone here has a favorite for their own reasons, but the guy building your motors should have his own combination and after all isn't that why you picked that builder?
Just my opinion.
Just my opinion.
#14
Banned
Re: Cylinder Head Choice For Blower Motors?
We'll get ya dialed in Mike if we go twins. I have a killer Big Chief Cylinder head combo For a blower package with a different port desgin. It will be based on a Dart casting. We have the technology! Have you sent the 2 good engines yet ?
Touch base with me when you send them. Thanks again! Mr.Horsepower
Touch base with me when you send them. Thanks again! Mr.Horsepower
#16
VIP Member
VIP Member
Re: Cylinder Head Choice For Blower Motors?
Originally Posted by SLINGSHOT
you ould be correct if i were buying new motors....i got these in the boat...heads are corroded....still usable but i want to replace them.....so hence the post
Call me if you are interested.
Craig
Cell)202-439-6940
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
#17
Registered User
Join Date: Dec 2003
Location: Crawfordville Florida
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cylinder Head Choice For Blower Motors?
I have some 14deg chief heads with alot of work done to them FOR SALE. originally going on a 706ci . complete with titanium valves, Jesel rockers retainers you choice of springs. they flow big numbers KR
#19
Re: Cylinder Head Choice For Blower Motors?
i appreciate all the comments and help...still in the air whether i am keeping triples or converting to stagger twins.....just want to get some forward motion here since i am starting to get some more free time
#20
Re: Cylinder Head Choice For Blower Motors?
Just trying to learn something here. I have been told by people I really respect that the big chief heads don't make much more hp than a good CNC'd conventional head untill you get over 6500 rpm. If this is the case wouldn't a good set of conventionals be better since your probably are not going to turn a 700+ cube motor into those rpm ranges. Just wondering what everyone elses experiences have been.