Inside Hydra Powerboats
#51
OSO Content Provider
Commercial Member
Thread Starter
Re: Inside Hydra Powerboats
1r
#52
OSO Content Provider
Commercial Member
Thread Starter
Re: Inside Hydra Powerboats
1s
#53
OSO Content Provider
Commercial Member
Thread Starter
Re: Inside Hydra Powerboats
Benihana
#54
OSO Content Provider
Commercial Member
Thread Starter
Re: Inside Hydra Powerboats
The Roger Mund "Spirit" molds were used to build an A-Class race boat named "Aqua-Holic"
I collaborated on the build of this boat as well.
I collaborated on the build of this boat as well.
#55
OSO Content Provider
Commercial Member
Thread Starter
Re: Inside Hydra Powerboats
1t
#56
OSO Content Provider
Commercial Member
Thread Starter
Re: Inside Hydra Powerboats
1u
#57
OSO Content Provider
Commercial Member
Thread Starter
Re: Inside Hydra Powerboats
1v
#58
OSO Content Provider
Commercial Member
Thread Starter
Re: Inside Hydra Powerboats
1w
Last edited by SHARKEY-IMAGES; 12-15-2005 at 10:37 PM.
#59
OSO Content Provider
Commercial Member
Thread Starter
Re: Inside Hydra Powerboats
Some things on the drawing board for Hydra:
#60
OSO Content Provider
Commercial Member
Thread Starter
Re: Inside Hydra Powerboats
It may have been Thrill....
Here is the mold for the 27 footer. Notice the transom is a bolt-on and the mold is a split mold so they can keep their options open in the future.
Here is the mold for the 27 footer. Notice the transom is a bolt-on and the mold is a split mold so they can keep their options open in the future.