What is trade value on 04 46 black thunder?
#13
Originally Posted by blaniac
Care to elaborate ??
PM is fine as well..
PM is fine as well..
but that is the "bad wrap" that was asked about..
#14
Originally Posted by Sean H
the bad wrap is that they porpoise, almost non-stop.. i have a house at the 18mm at LOTO and you can watch them go by all the time, just bouncing downing the lake... it must not be as bad as it looks when your in the boat, since there is plenty of them running around the lake... (and i think its more the bigger 46 maybe than the 43...)
but that is the "bad wrap" that was asked about..
but that is the "bad wrap" that was asked about..
#17
Originally Posted by 3600cat
Static in the line. Going to look at a 06 4x4 DURAMAX
Can't have a Ford pull out my boat.
Again. 
Can't have a Ford pull out my boat.
Again. 
make sure you get the new engine lbz or whatever it is called, i think they made both for awhile this year..
#18
My Maintenance Work Is Done By Berger's At Loto And A Picture Of Their Storage Lot All Summer Long Would Prove Evidence Of The Drive Issues They Still Have. It, As Always, Could Be Representative Of Poor Driving Skills But Weight/hp Ratio/porpoising Effect All Factor In As Well. It Is Tough To Keep Xr's On The Boat With 14k+ Pounds Which Is Why Bc Will Tell You They Are Building A Lot Of Triples Now To Spread Out The Weight Ratio. Those That Have The New 46's Love Them, But I Know The Used Ones Have A Tough Resell With A Stiff First Year Price.
#19
Wiggler, I think you're close on all of your numbers. I doubt if the drives are breaking all that often. I run mine pretty hard with more hp than that and i haven't had any major problems. Also my 43 doesn't porpoise.




