YEA, OVER THE HOILDAYS WE WILL BE WORKING ON FINISHING THE MOLD FOR THE HATCH.AND THE DASH IS FIBERGLASSSED INTO THE BOAT ALREADY, SO I HOPE TO HAVE SOME PICS POSTED AROUND THE HOILDAYS...

slick nick: sounds kool id like to see pic's to. how u opening up engine comp.?

i am going to be using either a electric rod or twin ram system.

why do you have any ideas or products?

No just wondering want more room myself. Sounds great but alot-o-work.

hey tizdad, i'll have the mold, i can make the hatch for you. the rams are goin to mount mid way back off of the fuel tank stringer.

you hace to make to cuts and fiberglass in two pieces across the boat, behind the back seat. and another across the back of the boat right above the rub rail.

Hey "Vicious One" you should be a little more discreet about the 39' molds...
Also, anyone with any 39' questions should give us a call (810) 794-5551.
As far as the width's go, here's what they are:
48' 11' beam
39' 12' beam
38' 10'6" beam
and our new 49' will have a 10' 6" beam as well.
narrower is faster, and with less angle on the bottoms than the earlier (39' and 48') models, it turns even better.
The 38' is incredible, and anyone that wants to come up to our shop in 2002 summer can judge for themselves.
(we like taking people for TESTRIDES!)
thanks,

gentlmen we have a special guest on our little ocean x thread,welcome Adam.we measured the 39 this weekend and yup almost 12 feet wide.BIG boat, gonna be fun paint'n. Adam if you get a chance tell Ross i have some graphics layouts for him to look at.i was up there about a month ago and he asked me to put some stuff togather for him.tell him i will be in touch ,got some really good fresh ones.

I'll do that GlassDave, you'll have to check out the new Wind deflector/dash were doing for our 38' canopy boat, its coming along nice.
Later,