need your advice tonight (saturday) on Drives
#11
VIP Member
VIP Member
Re: need your advice tonight (saturday) on Drives
Originally Posted by cuda
You don't think the linkage is hooked up wrong? Remember when we tested mine? It wouldn't move because the one we had the engine out on had the linkage wrong. You fixed it in about thirty seconds.
#12
Banned
Join Date: Sep 2001
Location: Deland, Florida
Posts: 25,191
Likes: 0
Received 0 Likes
on
0 Posts
Re: need your advice tonight (saturday) on Drives
Originally Posted by offshoredrillin
never doubt a "perf family member" old man...
It was strange. I got it off the trailer, and put both drives in reverse, and the boat just kind of sat there. At first, I thought I must have been hard aground. Timmy knew exactly what it was, just hooked the linkage on the other end of the lever.
#13
Platinum Member
Platinum Member
Thread Starter
Join Date: Jun 2004
Location: St-Hyacinthe, quebec, canada
Posts: 7,731
Received 372 Likes
on
250 Posts
Re: need your advice tonight (saturday) on Drives
switched the props and of course everything came ok...BUT! Have a little whistle when shifting forward, goes louder following RPM. Maybe Hot Pursuit was right... burned clutch ? Have to check this week...
Thanks for your advice!
Thanks for your advice!
Thread
Thread Starter
Forum
Replies
Last Post
bigo181979
General Boating Discussion
11
06-17-2008 07:51 AM
damdonzi
General Boating Discussion
15
11-10-2004 02:21 PM