Which ones have you had good luck with??

Looking to replace the hatch lift on my .38 Special.. its
reeeeeeaaaaaaaaaaal slooooooooooooooooooow



Suggestions???

Eddies Marine looked like a good one ,but there discontinued it, I just bought one from cp performance ,I am dissatisfied in the quality,not marine friendly.

I took some picks of the inside if you want to build one.

also do a search there are threads on how to make them in the tech section

http://www.livorsi.com/catalog/trim_...HATCH_ACTUATOR


Which I believe are the ones Fred carries

I just went Thur all this B.S. with my nor tech these electric rams are not the way.... i had 3 different screw type rams on mine it broke ever one of them....my hatch is very heavy and has a bad angle.. so i changed my two rams to two hyd units from apimarine 900# lift per ram what use to take 35 seconds now takes less than 5 it is unbelievable.. you can buy these rams at just a little more than the screw type and they are much smaller.... www.apimarine.com. good luck

Here is the pick of the acelorator ,if ya need the hole actuator the ones Fred sale look pretty cool in colors

There is another thread in the OSO news forum about hatch lifts . Just sme more info I have been talking about this for god knows how long