Re: TRS Out......Konrad In !
 

Way to go Konrad...for giving all those TRS boats a second crack at big power. :drink:

"I'd love to see all the Bravo and TRS boats with these drives so folks could do more boating and less time on the trailer."

I'm wit dat too! :cool:

Re: TRS Out......Konrad In !
 

That's why I did it. Don't have to worry about the drives.

Re: TRS Out......Konrad In !
 

Everyone using Konrads, do you see a speed difference in the Bravo vs. Konrad?

Re: TRS Out......Konrad In !
 

Well after all of the that, there might be a clearnace issue with the U-Joints. Biggus called me last night and Konrad and told me that the drives they shipped me should have had the smaller U-Joints. If my motors are properly aligned there won't be an issue, but if they are not, there may be a rubbing problem. Konrad said they will make it right and send a represenative to my house and change out the U joints. Seems like they are going to stand by there product and make it right. I think Biggus will probably be coming out for the swap. I am just glad that it isn't the middle of the summer and boating in NYS is over. I just want to be right and ready to go. Big investment for me to have issues. I will keep you posted.

Great deals on ebay for my TRS Drives. PM me if you are interested. NO RESERVES!!!!!!!!!!!!!!!!!!!!

http://search.ebay.com/trs-outdrive_W0QQsacatZQ2d1

Re: TRS Out......Konrad In !
 

cigrocket,
Like I've said before; Konrad is a stand up company with customer service second to none!

We had an issue with getting the wrong lower(OUR fault not Konrads) for a conversion we did and Konrad shipped a new one out ASAP without any charges. They just want it to be correct.

Will Merk or any of the other drive manufacturers do this? :cool:

Re: TRS Out......Konrad In !
 

You are correct. They are going to make it right. If my motor mounts are perfectly aligned and I can use the big U-Joint I will. If not, they are going to swap them out for me. No Charge. It's going to be a long winter. I can't wait to start Prop testing. I am still need to setup the tiebar situation

Re: TRS Out......Konrad In !
 

Call me and we can get it set up. Or I'll call Kurt and have him measure up when he's there.

Fionn

925.952.4240

Re: TRS Out......Konrad In !
 

The drives on center are 35.25".

Re: TRS Out......Konrad In !
 

1" Bar will run you about $600 with clevis ends.

I currently have my transoms off. I am really considering the konrads so should I just use the Konrad assemblies or just the mercs?