Monza SS 24

Does anyone know any thing about Don Carter at Offshore performance specialities, good or bad? Doller offshore is also a choice. The Bravo shop recommended Don Carter.

Wally

iTrader: (1)

No idea about him but Mark at BAM rebuilt both of my TRS drives and they are rock solid 3 years later!

-Wally

AGGRAVATION28

Me too...sorry about your drive.......but......5 seconds before she broke you looked damn good flying by me.

Monza SS 24

Wally, how much horsepower are you running through your drives?

Wally

iTrader: (1)

Around 450 +/-

-Wally

PJA

I Have Bought Parts And Had Advice From Both Bam And Don Both Seem To Be Straight Shooters. They Have Done Right By Me

Gary C

I had a TRS on my Donzi. I took it to Doller and swaped it for a new rebuilt. It looked better than a new one, and was still going after 4 years. They'll also ship. Great people to deal with!

skatermike24

Monza 24 I deal with Jim Leatherwood from Southside Outboard here in Orlando, my opinion the best stern drive man out there, he may have one or he will rebiuld yours, good prices, honest.His # is 407-658-2628 ask for Jimbob and tell him Mike sent you, good luck.

Goodfella

There are alot of companies rebuilding TRS drives but what makes use different than the rest is if we recieve the drive on a Monday we can usually turn it around in one day so you do not miss any boating When the drive gets disassembled we magnaflux(X-ray) all the main gears and shafts for cracks and stress points. We then assemble the drive with only original Mercruiser parts. Then it goes to the paint shop to get a beautiful new coat of black paint and new decals.

cast

HAVE 10 IN STOCK USED AND REBULIT FOR $365.00 IN LABOR PLUS 18% OVER COST ON PART AND $100.00 FOR PAINT LET CAST-A-LINE MARINE FIX YOUR TRS,[COLOR=red]