Anyone using FloScan to measure fuel consumption?
12-20-2006 | 02:15 PM
#22
artselectricinc.com
Joined: Dec 2000
Posts: 703
Likes: 27
From: Longview, WA, USA
Re: Anyone using FloScan to measure fuel consumption?
I use the twin scan on mine. Twin 502 415hp. Intrfaced with gps. can watch real time mpg. totalizer is always very accurate. excellent for long trips. highly recomended. Be warned: you may better off not knowing.
12-21-2006 | 04:31 AM
#24
Platinum Member
Joined: Dec 2002
Posts: 15,270
Likes: 21
From: Burlington, VT
Re: Anyone using FloScan to measure fuel consumption?
Originally Posted by BUIZILLA
I absolutely swear by mine...
I swear AT mine...
I use a Credit Card to measure fuel flow...
12-22-2006 | 09:10 PM
#25
Registered
Joined: Aug 2001
Posts: 83
Likes: 0
From: mitchellville,maryland
Re: Anyone using FloScan to measure fuel consumption?
Hey Jeff32,
As far as which one take the HP of each moter divide by 10% add 5 and this should give you a ballpark figure of you gph at wot...This is based on FloScan measurements....
As far as which one take the HP of each moter divide by 10% add 5 and this should give you a ballpark figure of you gph at wot...This is based on FloScan measurements....
12-23-2006 | 10:12 AM
#29
Offshoreonly Advertiser
Joined: Dec 2003
Posts: 141
Likes: 1
Re: Anyone using FloScan to measure fuel consumption?
Livorsi Marine has its own version of them with an anolog display to match the Livorsi line. They utilize the FloScan sensor. It is very important to match the correct HP to the gauge. visit www.livorsi.com
