Offshoreonly.com
Page 4 of 7
« First
2
3
4
5
6
Last »
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   New Whipple 305's (https://www.offshoreonly.com/forums/general-boating-discussion/149466-new-whipple-305s.html)

Whipple Charged 01-27-2007 02:51 PM
Re: New Whipple 305's
 
Originally Posted by Cat man do (Post 2004481)
Definatly A Very Nice Piece, Will It Be At La Boat Show. Marty
It will be, Teague's, Pfaff's, Imco's and CP's.

Thanks,
Dustin

Whipple Charged 01-27-2007 02:52 PM
Re: New Whipple 305's
 
Originally Posted by Tapa11 (Post 2007052)
Dustin, I need a SC to fit a '06 Chevy trk. I don't know of any Dealers close to me. How do I go about purchasing one? Would also like to talk to you about 2 305"s.
Email me where your located and I can see who we have in your area. [email protected]

Dustin

Whipple Charged 01-27-2007 02:54 PM
Re: New Whipple 305's
 
Originally Posted by ILMORdude (Post 2003976)
Dustin, I was at Eliminator few months back and i assume that was your boat (kinda obvious..haha) .... i cant wait to see it finished!!
Ya, it looks like a pack of sticker bandit's got ahold of it and tagged it ! :D

It's all done now, it's incredible.

Dustin

TeamSaris 01-27-2007 07:41 PM
Re: New Whipple 305's
 
3 Stickers on my toolbox :D

HotPursuit 01-27-2007 08:49 PM
Re: New Whipple 305's
 
Dustin in post 14 what over drive is that set up.How much boost can you get away with on 93?
600 in Big M alm heads solid roller with that set up EFI, Appox
HP? I'm looking forward to the project Marks working on.
Congrats on the new toy!!! :drink:
Thanks Keith,

Whipple Charged 01-27-2007 09:15 PM
Re: New Whipple 305's
 
Originally Posted by HotPursuit (Post 2007434)
Dustin in post 14 what over drive is that set up.How much boost can you get away with on 93?
600 in Big M alm heads solid roller with that set up EFI, Appox
HP? I'm looking forward to the project Marks working on.
Congrats on the new toy!!! :drink:
Thanks Keith,
That's 2:1. Remember it's made to turn over 3:1. 2:1 on a 600ci motor would be around 12-16psi depending on cylinder heads, exhaust, etc. 1200+hp. On one of the motors we tested, it had 1250hp @ 13psi, 6400rpm (600ci). @ 2.75:1, it had 19psi and 1475hp.

Thanks,
Dustin

HotPursuit 01-27-2007 09:32 PM
Re: New Whipple 305's
 
Thats bad ass. Was that pump gas or race fuel @ 19 psi?
Any problems with air intake temp at that ratio?
Thanks

Strip Poker 388 01-28-2007 12:15 AM
Re: New Whipple 305's
 
Originally Posted by HotPursuit (Post 2007434)
Dustin in post 14 what over drive is that set up.How much boost can you get away with on 93?
600 in Big M alm heads solid roller with that set up EFI, Appox
HP? I'm looking forward to the project Marks working on.
Congrats on the new toy!!! :drink:
Thanks Keith,

I want to see that comparison also!!!


Keith if you 2 AJ:rolleyes: can stay out of the all ya can eat buffet ya might able to keep up with me:rolleyes:

I just wish you 2 could carry a camera into those buffets:evilb:

Whipple Charged 01-29-2007 01:12 PM
Re: New Whipple 305's
 
Here's a picture of the carburated setup

http://img256.imageshack.us/img256/3...arbweb2iy6.jpg

Standard dual carb adapter bolts on:
http://img441.imageshack.us/img441/8...adaptermc6.jpg

HotPursuit 01-29-2007 01:12 PM
Re: New Whipple 305's
 
Originally Posted by Strip Poker 388 (Post 2007531)
I want to see that comparison also!!!


Keith if you 2 AJ:rolleyes: can stay out of the all ya can eat buffet ya might able to keep up with me:rolleyes:

I just wish you 2 could carry a camera into those buffets:evilb:
No matter what the thread we always end up in the same area!! I tried they took it from me! Rob you need to take off 1
friday and we can do professional comparisons!! :drink:


All times are GMT -5. The time now is 01:14 PM.
Page 4 of 7
« First
2
3
4
5
6
Last »
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.