30 AMT vs.32 Doug Wright?
#111
Racer
Racer
Join Date: Sep 2005
Location: L.I. N.Y. Boca Fla.
Posts: 2,126
Likes: 0
Received 0 Likes
on
0 Posts
Good my plan is working, get that blood pressure high and wham! you can't pass the physical!! Just kidding you know it wouldn't be any fun without you guys.(especially since you bring RG3). And to be fair we've also looked through your tunnel from the back too! Not that that will ever happen again.
#112
Racer
Racer
Join Date: Sep 2005
Location: L.I. N.Y. Boca Fla.
Posts: 2,126
Likes: 0
Received 0 Likes
on
0 Posts
#118
Registered
Join Date: Feb 2005
Location: nokomis florida
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
got the time to go look at the 04 amt yesterday,found that the bulkhead was split in 3 places ,2 at the bottom and 1 at the top, this is the support that runs lenghtways and in the middle under and in between the hatches, is this common? or has this hull just been flexed!
also i stopped by Diamond Marine and was in formed that Predator boats has the molds and are building them again,supposedly better and with different config's as well as Diamond is a dealer for them, Marty said that there running around 60 k for a un-rigged boat
also i stopped by Diamond Marine and was in formed that Predator boats has the molds and are building them again,supposedly better and with different config's as well as Diamond is a dealer for them, Marty said that there running around 60 k for a un-rigged boat
#119
Racer
Racer
Scott that boat was raced about 20 races and was the National Champion in Stock Class as SeaTow in SBI a few years back. It was then raced on and off in P class for 2 seasons. It was laid up by Yellowfin in Sarasota.
#120
Registered
Join Date: Feb 2005
Location: nokomis florida
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the info ryan, i was aware of the racing but i was told it was the original missasoukie boat ,never even heard mention of sea-tow, if it did all that it held up well!
question? do the imprints from the old stickers ever go away?
if you look at it you can see where they where and what they said. how do you get them out?
question? do the imprints from the old stickers ever go away?
if you look at it you can see where they where and what they said. how do you get them out?