And we'll probably see it through that new glass door :D

Phuck all of ya:D

That barge should hit 86.5 now:party-smiley-020: :traurig001:

Jeff,
You better put the Panic Pulley on Panther's engines.....He's gonna need more than 86 MPH. :D :angry-smiley-044:

It does that now. It will be a lot faster tomarrow when we install the third engine though.:signs043:

Hey Healey.........:signs069:

It wasn't anywhere near 86 when I was on it..... :party-smiley-048:

I think it was more like 79-80 and Billy never got it over 83...

Sak is growing a cabbage field... :party-smiley-020:

The tatle tail on the speedo was 85 when I reset it last year.:cool-smiley-011: :Whatever:

That's from when they were moving it on the travel lift :D

you're gonna need to rebuild them motors after all the dyno time over the months :throw:

At least he's saving on drive rebuilds :D

Na Billy probably left the power on trailering back from Florida.:eek: :food-smiley-009:

Yeah, he must have done that on the new boat too because he said it runs 97.... But last year I walked him on the ocean coming back from Pt. Pleasant.......and I was only running 81 mph..... He claimed a blower belt was slipping. Then a couple miles up the coast he blew a drive....

YIKES....:angry-smiley-055:

Billy and Chuck all excusses.

You gonna test this weekend?

I'm supposed to leave for Patchogue next Friday afternoon, I think one other boat is riding with me.

Saturday is the plan. One more to go in the hole, Install throttles and shifters and a few other odds and ends. I'd say ready to start on the hose late Thurs. or Fri. morning. With the volume of work I've done to this boat I keep drivin myself nuts thinking I forgot something. With my luck we'll get to the ramp and forget the keys.

Did they get the boat running yesterday? Testing tomorrow?

Downtown, I am not afraid to run my engines like others. They put the engine on warm it up, make two pulls and say it's finished. All of our marine engines get a minimum of 2-3 hours of actual run time. Warm up, break in , and testing. Cylinder heads are re-torqued , valve lash run a few times ( when applicable) , compression and leak down test performed after testing, ect. The Bad Boys are ready to rock when they go in the vessel. Of all the pairs or triples we have built, none have been no futher apart than 8 horsepower.:cool:

Is he in H2O Dean? and are you in NJ?? :)

The third engine is going in. I wish I was in NJ....looking forward to getting out of the shop and doing some boating up there with Nick. Oh.....and of course Dee!!:D

just kiddin around, you have a first class shop, watched your boat tv clips and would be on my list if I needed your expertise. :D

I thought the 3rd engine was going in on Wednesday?

Just got back from my boat though....installed the sub and speakers..it's LOUD!:cool-smiley-011:

I know that.:D

You better not forget about me!!!!!!!!! See ya soon!:party-smiley-020:

It was supposed to be but we got held up with gettin the generator running. It was easier for Tommy to get his fat azz in there without the engine in the way. Its all good now. Everything works. You can't rush perfection.:angry-smiley-044: :chill-pill:

You're starting to sound like Gellner with the perfection crap!!!!!



Glad to hear you're finally getting there!!!

I heard you and Frank were doing alittle work on the Apache this weekend. Sound good????????

Where do you think he learned it from! lol :rolleyes:

Frank did all the work. I supplied some wire and advice. With all the room in the cockpit (lack of room) I pointed from the dock a lot. He did a great job and I'd hire him if he wasn't so expensive! He's all set with the new mtx thunder marine setup. Sounds nice and a awesome improvement over the 1 pair of 6.5" standard horizon speakers that were in there before. :cool-smiley-011:

12" Sub, speakers, 1800W amp, cutting some BIG holes in the resin bucket, chasing wires, 6 hrs later it's done... :cool-smiley-011:

Oh yeah, did I say it's loud! :D

I'll be the first to admit....I know NOTHING about stereos. Thanks for your help bro!!! :cool-smiley-011:

Me to I don't even know how to turn these new ones on. Ever since they got rid of the knobs. What ever happened to the on off button saying on/off

Yeah, a simple POWER button would be nice....what's with this SOURCE button chit....:angry-smiley-055: :D

When I bought the Sony radio earlier this year I had to call hunster to figure out how to turn it on....

In two weeks you can boat with her on our big pond. Its closer you know. :D You comin to Kelleys labor day weekend? :cool:

The hole for the sub was 11 inches.....I need a shop vac........ lots of saw dust in the cockpit... :eek:

You should've mouted it in a box under the rear seat like mine no holes to cut.:cool-smiley-011:

Looks meaner when you can see it! :cool-smiley-011: The 12" Sub is yelling; "I'm comming to get cha!" It was to nice looking to hide it... :party-smiley-020:

Club Geronimo will be open for business this weekend. The gals sitting in the rear seat are going to like it... ;) Maybe RG3 can test it out this weekend...:D

Sounds good to me!! :drink:

Number three should be in as I write this if not it will be 1st am tomarow. The back two have been fired on the hose.
Ya think Tom could've hooked a fellow up and gave a phone call from the shop with one runnin?????? Nope.:traurig001: