Offshoreonly.com - GPS with video inputs

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - GPS with video inputs (https://www.offshoreonly.com/forums/general-boating-discussion/159552-gps-video-inputs.html)

BenPerfected

05-31-2007 06:38 PM

More Ray Marine CAM50 info:

http://www.raymarine.com/raymarine/a...9429&type=news

http://www.anchorexpress.com/product...amera_-_E03016

tanner

05-31-2007 07:39 PM

Quote:

Originally Posted by BenPerfected (Post 2146588)

Has anybody tried the new Ray Marine CAM50 camera? I just found this online for less than $200. It seems like this compact unit could be the low cost camera for below deck or the engine compartment.
Is there any reason this camera wouldn't work in any GPS with the NTSC connection? Where can you get a 30' video cable?

You can use Cat 5 with vellums attached to the ends for connection

ACTIVESHACK

06-02-2007 01:55 PM

2 Attachment(s)

Here's a few pics. for you Gino.

LubeJobs42

06-02-2007 03:23 PM

Quote:

Originally Posted by ACTIVESHACK (Post 2148467)

Here's a few pics. for you Gino.

That is friggen beatiful. Unfortunatly the dash in the new mti can't accomadate anything even close to that! I would have to remove every gauge on the port side to make that work. If I was startig from scratch that would be the way to go. Can the northstar gauge mode work with any engines or just the Mercs with smart craft?

ACTIVESHACK

06-02-2007 06:02 PM

Quote:

Originally Posted by LubeJobs42 (Post 2148493)

Thanks for the compliment :cool: Mine is the 12" model but they make a 6.5" 8.5" 10.5" 12" and a 15". I think it will only work with the Merc. setup. When i built the boat Pat had to order twin wiring harnesses on each motor to set it all up.

All times are GMT -5. The time now is 10:23 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page