Is My Prop To High?
04-12-2008 | 05:08 PM
#13
Thread Starter
Rob
Joined: Aug 2001
Posts: 21,637
Likes: 12
From: Ms
Being its a cnc prop from B Blades theres no need,the rpm is a little low though,The straight 14 cylinder doesn't rev to high .Peek HP was at 1250rpm.They build a lot of TQ with the bore size at 4foot each
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
