IMCO SCX and SCT
#4
Registered
Join Date: Jun 2006
Posts: 2,067
Likes: 0
Received 0 Likes
on
0 Posts
#8
Registered
I'm looking to put a set on my 2007 36' Spectre with 625 Ilmor's. Thinking about going up in drive height -2" and getting the big shaft (#6 props). Any suggestions based on your experience with these SCX drives?
#9
Registered
Join Date: May 2005
Location: Scottsdale
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
I believe they're still dialing in the 34,,no center pod and comparable beam and length to your Spectre,,,he should get you close
#10
Registered
Join Date: May 2008
Location: El Cajon, CA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
We're still doing our testing. We have only had the boat out one weekend so far and the conditions were less than ideal for testing. I will be doing a lot more testing this Thursday and Friday in California and then Saturday and Sunday in Havasu. I will let you know how everything goes next week. The boat is a 2009 Ultra 344 SC (34'4",10'4")with Ilmor 710s, IMCO SCX drives with standoff boxes, 1.34 gear ratio, 32 labbed Maximus props. So far I am very impressed with the IMCO SCX drives. This is the first boat built of this model, so I can't give you a comparison to any other engine and drive combos.