Xtremeracing

The IMCO shorty is a fast lower then the merc and is a much better buy for the money.The last test that was done in Miami the IMCO lower was 8 MPH faster then the merc.
You never know until you try one but they run different on ever hull.
The new skeg design on merc. is bigger then IMCO and can have a drag factor and result in being slower.For more info and pricing on both you can contact me at ([email protected])

26scarab

SDS,
Do you still have that used shorty case ?
If so I'm interested.

DEFYN GRAVITY

iTrader: (2)

Hey Mikey, Talk to me about the new Merc drive, Will it handle all the torque from the KE 675 (690 FT LBS 3000-5400 RPM)? I liked the new IMCO SC but it goes back to the gear set, are these any better? Thanks, Robbie

Tinkerer

DYNO --- Maybe we can get a package deal I have been trying to test the shorter drives for a while now. Better price on 4 ????

dyno

Steve If you find a better deal let me know....I talked to some guys down near Gunlake and they said they should be around $1100.

Jassman

Hey mike, Im in the same need of a drive soon for my Thunder, Robbie - DEFYGRANTY also needs one for his PowerPlay, we both have the same K.E. 675s, Im considering the Imco SC, but would like to know what is different about the gear set vs the xr. Thanks Jeff Jassby 228-255-3400

dyno

Spitfire that was a rumered price for the case and the input shaft only.....the best price so far was the one posted buy Steve Snider it was like $1700. each if we get a group price we might do better... but steve is usually at rock bottom give or take $100...Steve you reading this??????group prices?????

Goodfella

Jassman&Defy'nGravity!
Good Morning Gentlemen, I will give you both a jingle via phone and educate you on the differences between both drives. I can sell 4 cheaper than 2. It sounds like Steve Snider is on the ball with the Imco lower housing pricing. $1,700.00 each is a good price. $1,100.00 is WAY BELOW COST

Jassman

Hey Mike, left a message with your very nice secretary, 228-255-3400 office 228-216-0900 cell thanks have a good day.

Jassman

Thanks Mike, I apprieciate the quote, did that include everything to bolt right up to those K.E, motors, or is the housing extra, just want to make sure, thanks again, and I will get back to you. Jeff Jassby