Updating dash cost???
08-06-2008 | 10:42 PM
#11
Registered
Joined: Feb 2006
Posts: 1,184
Likes: 0
From: Decatur, Mi
Well I just upgraded my 280 Baja.
Original Baja Teleflex gauges and rings $450. gauges were new and the rings were used.
Used baja shifters $450
New switches $175
New compass $40.
I made the dash panels $20.
$1135 Total So it can be done.
Original Baja Teleflex gauges and rings $450. gauges were new and the rings were used.
Used baja shifters $450
New switches $175
New compass $40.
I made the dash panels $20.
$1135 Total So it can be done.
08-07-2008 | 10:22 AM
#12
Registered
Joined: Feb 2006
Posts: 1,826
Likes: 85
From: Tallahassee, FL
If you do some serious eBaying and are handy you can update your dash for MUCH less.
I did my Donzi (single engine, so keep that in mind) for about $200 not including the steering wheel.
That did include a new ignition switch, switches, a whole freaking array of Gaffrig/Livorsi gauges (10 of them including speedo and tach).
I did my Donzi (single engine, so keep that in mind) for about $200 not including the steering wheel.
That did include a new ignition switch, switches, a whole freaking array of Gaffrig/Livorsi gauges (10 of them including speedo and tach).
01-05-2009 | 08:21 PM
#17
Registered
Joined: Feb 2002
Posts: 6,656
Likes: 20
From: Lake Michigan
New panels, custom painted to match boat graphics, new gauges, sticks, sounder, compass, wheel, with wire up and install....$5K, not to mention another $876 for a new GPS.
Last edited by Back4More; 01-05-2009 at 08:55 PM.
01-08-2009 | 10:11 AM
#18
Registered
Joined: Nov 2008
Posts: 5
Likes: 0
Updating Dash
I am having new carbon panels done with a local company here in St. Louis Innotech Products
www.innotechproducts.com
www.innotechproducts.com
