Motor Damage During Shipping ??????
02-25-2009 | 08:45 AM
#91
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
Hey is'nt that the way everything in boating is ???
from what i'm being told im dreaming up the problem , and Pinky is a LIAR
so who am i to say signed the DREAMER
02-25-2009 | 10:16 AM
#92
Banned
Joined: Oct 2006
Posts: 5,844
Likes: 0
From: Bradenton Florida
I don't care about u LOL,,,,,,but calling Pinky a liar ,,thats to much.
PS.: he will be dreaming alright !!!!
02-25-2009 | 10:41 AM
#93
Registered
Joined: Dec 2006
Posts: 495
Likes: 0
From: Tucson, AZ
I really wish you would have given Larry a couple days to take care of this before you plaster it on websites. There was a misunderstanding between some people in the shop about what was needed and what happpened in shipping.
Do you really think Larry was gonna tell you to get f**ked??
You will no doubt get the parts you need to fix it.......Larry and his employees are some of the best in the business and have worked for years to get were they are today. It sucks to see some of the people on here jumping to conclusions.
They worked very hard on your motors Bill. Alot of issues were fixed and they rolled out of there making over 300 more horsepower a piece than when they came in.
I really hope you don't have anybody else "leak them down" or take them apart as some of your posts suggest. Take his advice, leave them were they are, and you will have a very, very, good running Skater.
I felt the need to come post for them since they do not get on the internet. Larry builds POWER and I will put his motors against ANY engine builders out there and he will stand by the work he does. If anybody thinks otherwise I have a Skater waitng for you...... HE WILL TAKE CARE OF YOU BILL.
I think you are a good guy bro, I just wish you would have handled this a little different......
Erik
02-25-2009 | 11:08 AM
#95
Registered
Joined: Dec 2006
Posts: 495
Likes: 0
From: Tucson, AZ
02-25-2009 | 12:33 PM
#96
VIP Member
Joined: Jan 2003
Posts: 930
Likes: 1
From: Tucson,Az.
Bill, Bill, Bill.............
I really wish you would have given Larry a couple days to take care of this before you plaster it on websites. There was a misunderstanding between some people in the shop about what was needed and what happpened in shipping.
Do you really think Larry was gonna tell you to get f**ked??
You will no doubt get the parts you need to fix it.......Larry and his employees are some of the best in the business and have worked for years to get were they are today. It sucks to see some of the people on here jumping to conclusions.
They worked very hard on your motors Bill. Alot of issues were fixed and they rolled out of there making over 300 more horsepower a piece than when they came in.
I really hope you don't have anybody else "leak them down" or take them apart as some of your posts suggest. Take his advice, leave them were they are, and you will have a very, very, good running Skater.
I felt the need to come post for them since they do not get on the internet. Larry builds POWER and I will put his motors against ANY engine builders out there and he will stand by the work he does. If anybody thinks otherwise I have a Skater waitng for you...... HE WILL TAKE CARE OF YOU BILL.
I think you are a good guy bro, I just wish you would have handled this a little different......
Erik
I really wish you would have given Larry a couple days to take care of this before you plaster it on websites. There was a misunderstanding between some people in the shop about what was needed and what happpened in shipping.
Do you really think Larry was gonna tell you to get f**ked??
You will no doubt get the parts you need to fix it.......Larry and his employees are some of the best in the business and have worked for years to get were they are today. It sucks to see some of the people on here jumping to conclusions.
They worked very hard on your motors Bill. Alot of issues were fixed and they rolled out of there making over 300 more horsepower a piece than when they came in.
I really hope you don't have anybody else "leak them down" or take them apart as some of your posts suggest. Take his advice, leave them were they are, and you will have a very, very, good running Skater.
I felt the need to come post for them since they do not get on the internet. Larry builds POWER and I will put his motors against ANY engine builders out there and he will stand by the work he does. If anybody thinks otherwise I have a Skater waitng for you...... HE WILL TAKE CARE OF YOU BILL.
I think you are a good guy bro, I just wish you would have handled this a little different......
Erik
02-25-2009 | 01:02 PM
#98
Registered
Joined: Dec 2006
Posts: 495
Likes: 0
From: Tucson, AZ
A mistake was made when they were packaged up and it will be made right.
02-25-2009 | 01:21 PM
#99
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
Bill, Bill, Bill.............
I really wish you would have given Larry a couple days to take care of this before you plaster it on websites. There was a misunderstanding between some people in the shop about what was needed and what happpened in shipping.
Do you really think Larry was gonna tell you to get f**ked??
You will no doubt get the parts you need to fix it.......Larry and his employees are some of the best in the business and have worked for years to get were they are today. It sucks to see some of the people on here jumping to conclusions.
They worked very hard on your motors Bill. Alot of issues were fixed and they rolled out of there making over 300 more horsepower a piece than when they came in.
I really hope you don't have anybody else "leak them down" or take them apart as some of your posts suggest. Take his advice, leave them were they are, and you will have a very, very, good running Skater.
I felt the need to come post for them since they do not get on the internet. Larry builds POWER and I will put his motors against ANY engine builders out there and he will stand by the work he does. If anybody thinks otherwise I have a Skater waitng for you...... HE WILL TAKE CARE OF YOU BILL.
I think you are a good guy bro, I just wish you would have handled this a little different......
Erik
I really wish you would have given Larry a couple days to take care of this before you plaster it on websites. There was a misunderstanding between some people in the shop about what was needed and what happpened in shipping.
Do you really think Larry was gonna tell you to get f**ked??
You will no doubt get the parts you need to fix it.......Larry and his employees are some of the best in the business and have worked for years to get were they are today. It sucks to see some of the people on here jumping to conclusions.
They worked very hard on your motors Bill. Alot of issues were fixed and they rolled out of there making over 300 more horsepower a piece than when they came in.
I really hope you don't have anybody else "leak them down" or take them apart as some of your posts suggest. Take his advice, leave them were they are, and you will have a very, very, good running Skater.
I felt the need to come post for them since they do not get on the internet. Larry builds POWER and I will put his motors against ANY engine builders out there and he will stand by the work he does. If anybody thinks otherwise I have a Skater waitng for you...... HE WILL TAKE CARE OF YOU BILL.
I think you are a good guy bro, I just wish you would have handled this a little different......
Erik
signed the DREAMER
02-25-2009 | 01:32 PM
#100
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
[QUOTE=skater40;2808371]I agreewith every thing eric said.I think you shot yourself in the foot with this childless tactic.[/QUOTE
No CHILDLESS TACTIC at all Skater40....... He WAS called & e-mailed AND given time to respond...24 HRS.+ with NO RESPONSE until Friday evening after the thread was started.
No one shot themself in the foot, everyone is entitled to their own opinion....just stated our opinion & wanted to know what other people's opinions were & what they have gone through.
PINKY
P.S. Bill had the speaker phone on when I was called a Liar...good customer service/public relations huh??????
No CHILDLESS TACTIC at all Skater40....... He WAS called & e-mailed AND given time to respond...24 HRS.+ with NO RESPONSE until Friday evening after the thread was started.
No one shot themself in the foot, everyone is entitled to their own opinion....just stated our opinion & wanted to know what other people's opinions were & what they have gone through.
PINKY
P.S. Bill had the speaker phone on when I was called a Liar...good customer service/public relations huh??????
