Offshoreonly.com - Crane Cams is shut down

Page 3 of 4

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Crane Cams is shut down (https://www.offshoreonly.com/forums/general-boating-discussion/203794-crane-cams-shut-down.html)

Strip Poker 388

02-25-2009 09:08 AM

Scoggins and Dicky in Tx might still have some.

RHC	02-25-2009 11:41 AM

Ron , your in box is full

RHC	02-25-2009 11:43 AM

Quote:

Originally Posted by Strip Poker 388 (Post 2808230)

Scoggins and Dicky in Tx might still have some.

Got a ph ## or website ?? Thanks Rob

Back4More

02-25-2009 01:01 PM

Doesn't Merc buy the cams, lifters, and rockers for the HP motors from Crane?

WOTW2E

02-25-2009 01:07 PM

Quote:

Originally Posted by Back4More (Post 2808385)

Doesn't Merc buy the cams, lifters, and rockers for the HP motors from Crane?

They sure do. I bet they have some inventory to last for a bit. They are probably scrambling to do some testing.

Strip Poker 388

02-25-2009 01:34 PM

Quote:

Originally Posted by Back4More (Post 2808385)

Doesn't Merc buy the cams, lifters, and rockers for the HP motors from Crane?

I wouldnt pay merc price, Comp cams has one thats real close to it people have been using,Crower rockers,RM builder on the springs or Isky.

rjcardinal

02-25-2009 02:34 PM

Quote:

Originally Posted by RHC (Post 2808338)

Ron , your in box is full

Empty now.

JasonSmith

02-25-2009 03:13 PM

Crane makes/made a great product.
I'm pretty sure they supply for GM also.

c_deezy

02-25-2009 03:43 PM

Quote:

Originally Posted by RHC (Post 2808340)

Got a ph ## or website ?? Thanks Rob

http://www.sdparts.com/categories/en...cessories.aspx

Cookin

02-25-2009 07:57 PM

Quote:

Originally Posted by Strip Poker 388 (Post 2808411)

I wouldnt pay merc price, Comp cams has one thats real close to it people have been using,Crower rockers,RM builder on the springs or Isky.

Would you happen to have the part # from Comp.Seems my Crane 731 with a 114 lobe separation on an 8.1 grind didn't make it out the door in time.

All times are GMT -5. The time now is 09:35 AM.

Page 3 of 4

Show 40 post(s) from this thread on one page