it cost 500 dollars for the 72 watts set on yachtlight.com
that's very cheap

I've got one Lumatech Blue/ white switchable.. 3000 lumens light left. I will take 200 for it. I bought 10 and installed 9 on my post. Brand enw in the box.

T
[email protected]

Where and how do these mount?

In Tallahassee Florida. Transom mount/ require a 1/2" hole for the wire.

I have it listed on Ebay.

http://cgi.ebay.com/ebaymotors/ws/eB...#ht_510wt_1167

I only have one but if you search ebay for another... there are a few. Mine is the cheapest... free shipping. I bought 10 for my 47' Post and ended up using 9(3 pods of 3).

I just checked back to this thread and I am glad I did. That is a way better deal. I especially like the fact that they are self contained, so you do not need to mount regulators inside the bilge. Do you have any details on the strobe?

Whats the cost of doing this? Is there anyone in the Northeast that would do the install?

go to the ocean LED site. I think the A6's are 4-500 each. Get two of them. Installation is basic if you have any sort of mehanical skill what-so-ever. Drill the hole, fill it with sealer, run the wire through, run the power to your battery and a wire to an extra switch in the dash. Or to make it even easier, put the switch just inside the engine hatch.

http://www.oceanled.com/

What sealer did you use?

Weeeeeeell, I didn't do the install. :drink: but I saw them (teauge) using a clear marine sealant. The hole for the wire is only about a 1/4" so it's not too invasive.

3m 5200?