Offshoreonly.com - Underwater LED Lights

Page 4 of 4

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Underwater LED Lights (https://www.offshoreonly.com/forums/general-boating-discussion/218136-underwater-led-lights.html)

JRalston

01-10-2010 09:47 PM

Quote:

Originally Posted by mikes280 (Post 3021444)

3m 5200?

Thats what i was thinking but probably need to be sure before you drill some holes below the water line!!

jonyb

01-14-2010 06:43 AM

3M 5200.... That's what the swim platform on my Baja was mounted with (along with bolts), but when teh bolts were out, it still just about didnt' come off.

My shop is picking up the Shadow-Casters. Should be available in a few weeks.

aTX427

01-14-2010 08:10 AM

The install instructions for the Shadow Casters specifically states to use regular silcone and NOT to use 5200.

jonyb

01-14-2010 09:28 AM

Meant to say 4200. I don't trust normal silicone to seal up an underwater hole.

All times are GMT -5. The time now is 01:15 AM.

Page 4 of 4

« First

Show 40 post(s) from this thread on one page