|
The new trannies set the motors forward a bit.
|
Originally Posted by Back4More
(Post 2989834)
The new trannies set the motors forward a bit.
:drink: Rob |
Yes, you need to install a rear motor mount on the close-coupled engine and drill new holes in the stringers along with a few other changes.
|
Originally Posted by Got Freedom?
(Post 2992592)
Yes, you need to install a rear motor mount on the close-coupled engine and drill new holes in the stringers along with a few other changes.
|
How much power will the NXT transmissions support?
|
Originally Posted by Got Freedom?
(Post 2992592)
Yes, you need to install a rear motor mount on the close-coupled engine and drill new holes in the stringers along with a few other changes.
|
1 Attachment(s)
I like that picture too, here you go.
|
Yes, I swapped my NXT transmissions for Huber 1450s. According to the Mercury Racing shop manual the NXT transmissions are rated for 800 ft lbs of torque.
|
Originally Posted by Got Freedom?
(Post 2993117)
Yes, I swapped my NXT transmissions for Huber 1450s. According to the Mercury Racing shop manual the NXT transmissions are rated for 800 ft lbs of torque.
What kind of torque does the whipple 700 upgrade give you? |
We did it on a 353 formula with 600s, boat now runs over 100. Very sucessful
|
| All times are GMT -5. The time now is 06:24 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.